Moved Doxygen comments from source files to public headers.

Conflicts:
	include/libimobiledevice/afc.h

20 files changed, 2 insertions, 2478 deletions

diff --git a/src/afc.c b/src/afc.c
index dd75558..b5203f1 100644
--- a/src/afc.c
+++ b/src/afc.c
@@ -95,18 +95,6 @@ afc_error_t afc_client_new_with_service_client(service_client_t service_client,
 	return AFC_E_SUCCESS;
 }
 
-/**
- * Makes a connection to the AFC service on the device.
- * 
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will be set to a newly allocated afc_client_t
- *     upon successful return.
- * 
- * @return AFC_E_SUCCESS on success, AFC_E_INVALID_ARG if device or service is
- *  invalid, AFC_E_MUX_ERROR if the connection cannot be established,
- *  or AFC_E_NO_MEM if there is a memory allocation problem.
- */
 afc_error_t afc_client_new(idevice_t device, lockdownd_service_descriptor_t service, afc_client_t * client)
 {
 	if (!device || !service || service->port == 0)
@@ -126,19 +114,6 @@ afc_error_t afc_client_new(idevice_t device, lockdownd_service_descriptor_t serv
 	return err;
 }
 
-/**
- * Starts a new AFC service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     afc_client_t upon successful return. Must be freed using
- *     afc_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return AFC_E_SUCCESS on success, or an AFC_E_* error
- *     code otherwise.
- */
 afc_error_t afc_client_start_service(idevice_t device, afc_client_t * client, const char* label)
 {
 	afc_error_t err = AFC_E_UNKNOWN_ERROR;
@@ -146,12 +121,6 @@ afc_error_t afc_client_start_service(idevice_t device, afc_client_t * client, co
 	return err;
 }
 
-/**
- * Frees up an AFC client. If the connection was created by the
- * client itself, the connection will be closed.
- * 
- * @param client The client to free.
- */
 afc_error_t afc_client_free(afc_client_t client)
 {
 	if (!client || !client->afc_packet)
@@ -432,16 +401,6 @@ static char **make_strings_list(char *tokens, uint32_t length)
 	return list;
 }
 
-/**
- * Gets a directory listing of the directory requested.
- * 
- * @param client The client to get a directory listing from.
- * @param dir The directory to list. (must be a fully-qualified path)
- * @param list A char list of files in that directory, terminated by an empty
- *         string or NULL if there was an error.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_read_directory(afc_client_t client, const char *dir, char ***list)
 {
 	uint32_t bytes = 0;
@@ -478,17 +437,6 @@ afc_error_t afc_read_directory(afc_client_t client, const char *dir, char ***lis
 	return ret;
 }
 
-/**
- * Get device information for a connected client. The device information
- * returned is the device model as well as the free space, the total capacity
- * and blocksize on the accessed disk partition.
- * 
- * @param client The client to get device info for.
- * @param infos A char ** list of parameters as given by AFC or NULL if there
- *  was an error.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_get_device_info(afc_client_t client, char ***infos)
 {
 	uint32_t bytes = 0;
@@ -526,17 +474,6 @@ afc_error_t afc_get_device_info(afc_client_t client, char ***infos)
 	return ret;
 }
 
-/**
- * Get a specific key of the device info list for a client connection.
- * Known key values are: Model, FSTotalBytes, FSFreeBytes and FSBlockSize.
- * This is a helper function for afc_get_device_info().
- *
- * @param client The client to get device info for.
- * @param key The key to get the value of.
- * @param value The value for the key if successful or NULL otherwise.
- *
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_get_device_info_key(afc_client_t client, const char *key, char **value)
 {
 	afc_error_t ret = AFC_E_INTERNAL_ERROR;
@@ -564,14 +501,6 @@ afc_error_t afc_get_device_info_key(afc_client_t client, const char *key, char *
 	return ret;
 }
 
-/**
- * Deletes a file or directory.
- * 
- * @param client The client to use.
- * @param path The path to delete. (must be a fully-qualified path)
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_remove_path(afc_client_t client, const char *path)
 {
 	uint32_t bytes = 0;
@@ -600,15 +529,6 @@ afc_error_t afc_remove_path(afc_client_t client, const char *path)
 	return ret;
 }
 
-/**
- * Renames a file or directory on the device.
- * 
- * @param client The client to have rename.
- * @param from The name to rename from. (must be a fully-qualified path)
- * @param to The new name. (must also be a fully-qualified path)
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_rename_path(afc_client_t client, const char *from, const char *to)
 {
 	char *buffer = (char *) malloc(sizeof(char) * (strlen(from) + strlen(to) + 1 + sizeof(uint32_t)));
@@ -638,15 +558,6 @@ afc_error_t afc_rename_path(afc_client_t client, const char *from, const char *t
 	return ret;
 }
 
-/**
- * Creates a directory on the device.
- * 
- * @param client The client to use to make a directory.
- * @param dir The directory's path. (must be a fully-qualified path, I assume
- *        all other mkdir restrictions apply as well)
- *
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_make_directory(afc_client_t client, const char *dir)
 {
 	uint32_t bytes = 0;
@@ -671,17 +582,6 @@ afc_error_t afc_make_directory(afc_client_t client, const char *dir)
 	return ret;
 }
 
-/**
- * Gets information about a specific file.
- * 
- * @param client The client to use to get the information of the file.
- * @param path The fully-qualified path to the file. 
- * @param infolist Pointer to a buffer that will be filled with a NULL-terminated
- *                 list of strings with the file information.
- *                 Set to NULL before calling this function.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_get_file_info(afc_client_t client, const char *path, char ***infolist)
 {
 	char *received = NULL;
@@ -712,19 +612,6 @@ afc_error_t afc_get_file_info(afc_client_t client, const char *path, char ***inf
 	return ret;
 }
 
-/**
- * Opens a file on the device.
- * 
- * @param client The client to use to open the file. 
- * @param filename The file to open. (must be a fully-qualified path)
- * @param file_mode The mode to use to open the file. Can be AFC_FILE_READ or
- * 		    AFC_FILE_WRITE; the former lets you read and write,
- * 		    however, and the second one will *create* the file,
- * 		    destroying anything previously there.
- * @param handle Pointer to a uint64_t that will hold the handle of the file
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 idevice_error_t
 afc_file_open(afc_client_t client, const char *filename,
 					 afc_file_mode_t file_mode, uint64_t *handle)
@@ -772,17 +659,6 @@ afc_file_open(afc_client_t client, const char *filename,
 	return ret;
 }
 
-/**
- * Attempts to the read the given number of bytes from the given file.
- * 
- * @param client The relevant AFC client
- * @param handle File handle of a previously opened file
- * @param data The pointer to the memory region to store the read data
- * @param length The number of bytes to read
- * @param bytes_read The number of bytes actually read.
- *
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 idevice_error_t
 afc_file_read(afc_client_t client, uint64_t handle, char *data, uint32_t length, uint32_t *bytes_read)
 {
@@ -837,17 +713,6 @@ afc_file_read(afc_client_t client, uint64_t handle, char *data, uint32_t length,
 	return ret;
 }
 
-/**
- * Writes a given number of bytes to a file.
- * 
- * @param client The client to use to write to the file.
- * @param handle File handle of previously opened file. 
- * @param data The data to write to the file.
- * @param length How much data to write.
- * @param bytes_written The number of bytes actually written to the file.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 idevice_error_t
 afc_file_write(afc_client_t client, uint64_t handle, const char *data, uint32_t length, uint32_t *bytes_written)
 {
@@ -881,12 +746,6 @@ afc_file_write(afc_client_t client, uint64_t handle, const char *data, uint32_t
 	return ret;
 }
 
-/**
- * Closes a file on the device.
- * 
- * @param client The client to close the file with.
- * @param handle File handle of a previously opened file.
- */
 afc_error_t afc_file_close(afc_client_t client, uint64_t handle)
 {
 	uint32_t bytes = 0;
@@ -915,18 +774,6 @@ afc_error_t afc_file_close(afc_client_t client, uint64_t handle)
 	return ret;
 }
 
-/**
- * Locks or unlocks a file on the device. 
- *
- * makes use of flock on the device, see
- * http://developer.apple.com/documentation/Darwin/Reference/ManPages/man2/flock.2.html
- *
- * @param client The client to lock the file with.
- * @param handle File handle of a previously opened file.
- * @param operation the lock or unlock operation to perform, this is one of
- *        AFC_LOCK_SH (shared lock), AFC_LOCK_EX (exclusive lock),
- *        or AFC_LOCK_UN (unlock).
- */
 afc_error_t afc_file_lock(afc_client_t client, uint64_t handle, afc_lock_op_t operation)
 {
 	uint32_t bytes = 0;
@@ -961,16 +808,6 @@ afc_error_t afc_file_lock(afc_client_t client, uint64_t handle, afc_lock_op_t op
 	return ret;
 }
 
-/**
- * Seeks to a given position of a pre-opened file on the device. 
- * 
- * @param client The client to use to seek to the position.
- * @param handle File handle of a previously opened.
- * @param offset Seek offset.
- * @param whence Seeking direction, one of SEEK_SET, SEEK_CUR, or SEEK_END.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_file_seek(afc_client_t client, uint64_t handle, int64_t offset, int whence)
 {
 	uint32_t bytes = 0;
@@ -1004,15 +841,6 @@ afc_error_t afc_file_seek(afc_client_t client, uint64_t handle, int64_t offset,
 	return ret;
 }
 
-/**
- * Returns current position in a pre-opened file on the device.
- * 
- * @param client The client to use.
- * @param handle File handle of a previously opened file.
- * @param position Position in bytes of indicator
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_file_tell(afc_client_t client, uint64_t handle, uint64_t *position)
 {
 	char *buffer = (char *) malloc(sizeof(char) * 8);
@@ -1047,18 +875,6 @@ afc_error_t afc_file_tell(afc_client_t client, uint64_t handle, uint64_t *positi
 	return ret;
 }
 
-/**
- * Sets the size of a file on the device.
- * 
- * @param client The client to use to set the file size.
- * @param handle File handle of a previously opened file.
- * @param newsize The size to set the file to. 
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- * 
- * @note This function is more akin to ftruncate than truncate, and truncate
- *       calls would have to open the file before calling this, sadly.
- */
 afc_error_t afc_file_truncate(afc_client_t client, uint64_t handle, uint64_t newsize)
 {
 	uint32_t bytes = 0;
@@ -1090,15 +906,6 @@ afc_error_t afc_file_truncate(afc_client_t client, uint64_t handle, uint64_t new
 	return ret;
 }
 
-/**
- * Sets the size of a file on the device without prior opening it.
- * 
- * @param client The client to use to set the file size.
- * @param path The path of the file to be truncated.
- * @param newsize The size to set the file to. 
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_truncate(afc_client_t client, const char *path, uint64_t newsize)
 {
 	char *buffer = (char *) malloc(sizeof(char) * (strlen(path) + 1 + 8));
@@ -1129,16 +936,6 @@ afc_error_t afc_truncate(afc_client_t client, const char *path, uint64_t newsize
 	return ret;
 }
 
-/**
- * Creates a hard link or symbolic link on the device. 
- * 
- * @param client The client to use for making a link
- * @param linktype 1 = hard link, 2 = symlink
- * @param target The file to be linked.
- * @param linkname The name of link.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_make_link(afc_client_t client, afc_link_type_t linktype, const char *target, const char *linkname)
 {
 	char *buffer = (char *) malloc(sizeof(char) * (strlen(target)+1 + strlen(linkname)+1 + 8));
@@ -1173,15 +970,6 @@ afc_error_t afc_make_link(afc_client_t client, afc_link_type_t linktype, const c
 	return ret;
 }
 
-/**
- * Sets the modification time of a file on the device.
- * 
- * @param client The client to use to set the file size.
- * @param path Path of the file for which the modification time should be set.
- * @param mtime The modification time to set in nanoseconds since epoch.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_set_file_time(afc_client_t client, const char *path, uint64_t mtime)
 {
 	char *buffer = (char *) malloc(sizeof(char) * (strlen(path) + 1 + 8));
diff --git a/src/diagnostics_relay.c b/src/diagnostics_relay.c
index de3781c..cc9c645 100644
--- a/src/diagnostics_relay.c
+++ b/src/diagnostics_relay.c
@@ -69,18 +69,6 @@ static int diagnostics_relay_check_result(plist_t dict)
 	return ret;
 }
 
-/**
- * Connects to the diagnostics_relay service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Reference that will point to a newly allocated
- *     diagnostics_relay_client_t upon successful return.
- *
- * @return DIAGNOSTICS_RELAY_E_SUCCESS on success,
- *     DIAGNOSTICS_RELAY_E_INVALID_ARG when one of the parameters is invalid,
- *     or DIAGNOSTICS_RELAY_E_MUX_ERROR when the connection failed.
- */
 diagnostics_relay_error_t diagnostics_relay_client_new(idevice_t device, lockdownd_service_descriptor_t service, diagnostics_relay_client_t *client)
 {
 	if (!device || !service || service->port == 0 || !client || *client) {
@@ -101,19 +89,6 @@ diagnostics_relay_error_t diagnostics_relay_client_new(idevice_t device, lockdow
 	return DIAGNOSTICS_RELAY_E_SUCCESS;
 }
 
-/**
- * Starts a new diagnostics_relay service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     diagnostics_relay_client_t upon successful return. Must be freed using
- *     diagnostics_relay_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return DIAGNOSTICS_RELAY_E_SUCCESS on success, or an DIAGNOSTICS_RELAY_E_* error
- *     code otherwise.
- */
 diagnostics_relay_error_t diagnostics_relay_client_start_service(idevice_t device, diagnostics_relay_client_t * client, const char* label)
 {
 	diagnostics_relay_error_t err = DIAGNOSTICS_RELAY_E_UNKNOWN_ERROR;
@@ -121,17 +96,6 @@ diagnostics_relay_error_t diagnostics_relay_client_start_service(idevice_t devic
 	return err;
 }
 
-/**
- * Disconnects a diagnostics_relay client from the device and frees up the 
- * diagnostics_relay client data.
- *
- * @param client The diagnostics_relay client to disconnect and free.
- *
- * @return DIAGNOSTICS_RELAY_E_SUCCESS on success,
- *     DIAGNOSTICS_RELAY_E_INVALID_ARG when one of client or client->parent
- *     is invalid, or DIAGNOSTICS_RELAY_E_UNKNOWN_ERROR when the was an
- *     error freeing the parent property_list_service client.
- */
 diagnostics_relay_error_t diagnostics_relay_client_free(diagnostics_relay_client_t client)
 {
 	if (!client)
@@ -198,16 +162,6 @@ static diagnostics_relay_error_t diagnostics_relay_send(diagnostics_relay_client
 	return ret;
 }
 
-/**
- * Sends the Goodbye request signaling the end of communication.
- *
- * @param client The diagnostics_relay client
- *
- * @return DIAGNOSTICS_RELAY_E_SUCCESS on success,
- *  DIAGNOSTICS_RELAY_E_INVALID_ARG when client is NULL,
- *  DIAGNOSTICS_RELAY_E_PLIST_ERROR if the device did not acknowledge the
- *  request
- */
 diagnostics_relay_error_t diagnostics_relay_goodbye(diagnostics_relay_client_t client)
 {
 	if (!client)
@@ -242,16 +196,6 @@ diagnostics_relay_error_t diagnostics_relay_goodbye(diagnostics_relay_client_t c
 	return ret;
 }
 
-/**
- * Puts the device into deep sleep mode and disconnects from host.
- *
- * @param client The diagnostics_relay client
- *
- * @return DIAGNOSTICS_RELAY_E_SUCCESS on success,
- *  DIAGNOSTICS_RELAY_E_INVALID_ARG when client is NULL,
- *  DIAGNOSTICS_RELAY_E_PLIST_ERROR if the device did not acknowledge the
- *  request
- */
 diagnostics_relay_error_t diagnostics_relay_sleep(diagnostics_relay_client_t client)
 {
 	if (!client)
@@ -328,41 +272,11 @@ static diagnostics_relay_error_t internal_diagnostics_relay_action(diagnostics_r
 	return ret;
 }
 
-/**
- * Restart the device and optionally show a user notification.
- *
- * @param client The diagnostics_relay client
- * @param flags A binary flag combination of
- *        DIAGNOSTICS_RELAY_ACTION_FLAG_WAIT_FOR_DISCONNECT to wait until 
- *        diagnostics_relay_client_free() disconnects before execution and
- *        DIAGNOSTICS_RELAY_ACTION_FLAG_DISPLAY_FAIL to show a "FAIL" dialog
- *        or DIAGNOSTICS_RELAY_ACTION_FLAG_DISPLAY_PASS to show an "OK" dialog
- *
- * @return DIAGNOSTICS_RELAY_E_SUCCESS on success,
- *  DIAGNOSTICS_RELAY_E_INVALID_ARG when client is NULL,
- *  DIAGNOSTICS_RELAY_E_PLIST_ERROR if the device did not acknowledge the
- *  request
- */
 diagnostics_relay_error_t diagnostics_relay_restart(diagnostics_relay_client_t client, int flags)
 {
 	return internal_diagnostics_relay_action(client, "Restart", flags);
 }
 
-/**
- * Shutdown of the device and optionally show a user notification.
- *
- * @param client The diagnostics_relay client
- * @param flags A binary flag combination of
- *        DIAGNOSTICS_RELAY_ACTION_FLAG_WAIT_FOR_DISCONNECT to wait until 
- *        diagnostics_relay_client_free() disconnects before execution and
- *        DIAGNOSTICS_RELAY_ACTION_FLAG_DISPLAY_FAIL to show a "FAIL" dialog
- *        or DIAGNOSTICS_RELAY_ACTION_FLAG_DISPLAY_PASS to show an "OK" dialog
- *
- * @return DIAGNOSTICS_RELAY_E_SUCCESS on success,
- *  DIAGNOSTICS_RELAY_E_INVALID_ARG when client is NULL,
- *  DIAGNOSTICS_RELAY_E_PLIST_ERROR if the device did not acknowledge the
- *  request
- */
 diagnostics_relay_error_t diagnostics_relay_shutdown(diagnostics_relay_client_t client, int flags)
 {
 	return internal_diagnostics_relay_action(client, "Shutdown", flags);
diff --git a/src/file_relay.c b/src/file_relay.c
index fb802a8..3d1eb12 100644
--- a/src/file_relay.c
+++ b/src/file_relay.c
@@ -24,18 +24,6 @@
 #include "property_list_service.h"
 #include "common/debug.h"
 
-/**
- * Connects to the file_relay service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Reference that will point to a newly allocated
- *     file_relay_client_t upon successful return.
- *
- * @return FILE_RELAY_E_SUCCESS on success,
- *     FILE_RELAY_E_INVALID_ARG when one of the parameters is invalid,
- *     or FILE_RELAY_E_MUX_ERROR when the connection failed.
- */
 file_relay_error_t file_relay_client_new(idevice_t device, lockdownd_service_descriptor_t service, file_relay_client_t *client)
 {
 	if (!device || !service || service->port == 0 || !client || *client) {
@@ -56,19 +44,6 @@ file_relay_error_t file_relay_client_new(idevice_t device, lockdownd_service_des
 	return FILE_RELAY_E_SUCCESS;
 }
 
-/**
- * Starts a new file_relay service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     file_relay_client_t upon successful return. Must be freed using
- *     file_relay_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return FILE_RELAY_E_SUCCESS on success, or an FILE_RELAY_E_* error
- *     code otherwise.
- */
 file_relay_error_t file_relay_client_start_service(idevice_t device, file_relay_client_t * client, const char* label)
 {
 	file_relay_error_t err = FILE_RELAY_E_UNKNOWN_ERROR;
@@ -76,17 +51,6 @@ file_relay_error_t file_relay_client_start_service(idevice_t device, file_relay_
 	return err;
 }
 
-/**
- * Disconnects a file_relay client from the device and frees up the file_relay
- * client data.
- *
- * @param client The file_relay client to disconnect and free.
- *
- * @return FILE_RELAY_E_SUCCESS on success,
- *     FILE_RELAY_E_INVALID_ARG when one of client or client->parent
- *     is invalid, or FILE_RELAY_E_UNKNOWN_ERROR when the was an error
- *     freeing the parent property_list_service client.
- */
 file_relay_error_t file_relay_client_free(file_relay_client_t client)
 {
 	if (!client)
@@ -98,37 +62,6 @@ file_relay_error_t file_relay_client_free(file_relay_client_t client)
 	return FILE_RELAY_E_SUCCESS;
 }
 
-/**
- * Request data for the given sources.
- *
- * @param client The connected file_relay client.
- * @param sources A NULL-terminated list of sources to retrieve.
- *     Valid sources are:
- *     - AppleSupport
- *     - Network
- *     - VPN
- *     - WiFi
- *     - UserDatabases
- *     - CrashReporter
- *     - tmp
- *     - SystemConfiguration
- * @param connection The connection that has to be used for receiving the 
- *     data using idevice_connection_receive(). The connection will be closed
- *     automatically by the device, but use file_relay_client_free() to clean
- *     up properly.
- * @param timeout Maximum time in milliseconds to wait for data.
- *
- * @note WARNING: Don't call this function without reading the data afterwards.
- *     A directory mobile_file_relay.XXXX used for creating the archive will
- *     remain in the /tmp directory otherwise.
- *
- * @return FILE_RELAY_E_SUCCESS on succes, FILE_RELAY_E_INVALID_ARG when one or
- *     more parameters are invalid, FILE_RELAY_E_MUX_ERROR if a communication
- *     error occurs, FILE_RELAY_E_PLIST_ERROR when the received result is NULL
- *     or is not a valid plist, FILE_RELAY_E_INVALID_SOURCE if one or more
- *     sources are invalid, FILE_RELAY_E_STAGING_EMPTY if no data is available
- *     for the given sources, or FILE_RELAY_E_UNKNOWN_ERROR otherwise.
- */
 file_relay_error_t file_relay_request_sources_timeout(file_relay_client_t client, const char **sources, idevice_connection_t *connection, unsigned int timeout)
 {
 	if (!client || !client->parent || !sources || !sources[0]) {
@@ -218,37 +151,6 @@ leave:
 	return err;
 }
 
-/**
- * Request data for the given sources. Calls file_relay_request_sources_timeout() with
- * a timeout of 60000 milliseconds (60 seconds).
- *
- * @param client The connected file_relay client.
- * @param sources A NULL-terminated list of sources to retrieve.
- *     Valid sources are:
- *     - AppleSupport
- *     - Network
- *     - VPN
- *     - WiFi
- *     - UserDatabases
- *     - CrashReporter
- *     - tmp
- *     - SystemConfiguration
- * @param connection The connection that has to be used for receiving the
- *     data using idevice_connection_receive(). The connection will be closed
- *     automatically by the device, but use file_relay_client_free() to clean
- *     up properly.
- *
- * @note WARNING: Don't call this function without reading the data afterwards.
- *     A directory mobile_file_relay.XXXX used for creating the archive will
- *     remain in the /tmp directory otherwise.
- *
- * @return FILE_RELAY_E_SUCCESS on succes, FILE_RELAY_E_INVALID_ARG when one or
- *     more parameters are invalid, FILE_RELAY_E_MUX_ERROR if a communication
- *     error occurs, FILE_RELAY_E_PLIST_ERROR when the received result is NULL
- *     or is not a valid plist, FILE_RELAY_E_INVALID_SOURCE if one or more
- *     sources are invalid, FILE_RELAY_E_STAGING_EMPTY if no data is available
- *     for the given sources, or FILE_RELAY_E_UNKNOWN_ERROR otherwise.
- */
 file_relay_error_t file_relay_request_sources(file_relay_client_t client, const char **sources, idevice_connection_t *connection)
 {
 	return file_relay_request_sources_timeout(client, sources, connection, 60000);
diff --git a/src/heartbeat.c b/src/heartbeat.c
index e03b44e..7654dd0 100644
--- a/src/heartbeat.c
+++ b/src/heartbeat.c
@@ -58,18 +58,6 @@ static heartbeat_error_t heartbeat_error(property_list_service_error_t err)
 	return HEARTBEAT_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the heartbeat service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will point to a newly allocated
- *     heartbeat_client_t upon successful return. Must be freed using
- *     heartbeat_client_free() after use.
- *
- * @return HEARTBEAT_E_SUCCESS on success, HEARTBEAT_E_INVALID_ARG when
- *     client is NULL, or an HEARTBEAT_E_* error code otherwise.
- */
 heartbeat_error_t heartbeat_client_new(idevice_t device, lockdownd_service_descriptor_t service, heartbeat_client_t * client)
 {
 	*client = NULL;
@@ -97,19 +85,6 @@ heartbeat_error_t heartbeat_client_new(idevice_t device, lockdownd_service_descr
 	return 0;
 }
 
-/**
- * Starts a new heartbeat service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     heartbeat_client_t upon successful return. Must be freed using
- *     heartbeat_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return HEARTBEAT_E_SUCCESS on success, or an HEARTBEAT_E_* error
- *     code otherwise.
- */
 heartbeat_error_t heartbeat_client_start_service(idevice_t device, heartbeat_client_t * client, const char* label)
 {
 	heartbeat_error_t err = HEARTBEAT_E_UNKNOWN_ERROR;
@@ -117,15 +92,6 @@ heartbeat_error_t heartbeat_client_start_service(idevice_t device, heartbeat_cli
 	return err;
 }
 
-/**
- * Disconnects a heartbeat client from the device and frees up the
- * heartbeat client data.
- *
- * @param client The heartbeat client to disconnect and free.
- *
- * @return HEARTBEAT_E_SUCCESS on success, HEARTBEAT_E_INVALID_ARG when
- *     client is NULL, or an HEARTBEAT_E_* error code otherwise.
- */
 heartbeat_error_t heartbeat_client_free(heartbeat_client_t client)
 {
 	if (!client)
@@ -137,15 +103,6 @@ heartbeat_error_t heartbeat_client_free(heartbeat_client_t client)
 	return err;
 }
 
-/**
- * Sends a plist to the service.
- *
- * @param client The heartbeat client
- * @param plist The plist to send
- *
- * @return HEARTBEAT_E_SUCCESS on success,
- *  HEARTBEAT_E_INVALID_ARG when client or plist is NULL
- */
 heartbeat_error_t heartbeat_send(heartbeat_client_t client, plist_t plist)
 {
 	heartbeat_error_t res = HEARTBEAT_E_UNKNOWN_ERROR;
@@ -161,35 +118,11 @@ heartbeat_error_t heartbeat_send(heartbeat_client_t client, plist_t plist)
 	return res;
 }
 
-/**
- * Receives a plist from the service.
- *
- * @param client The heartbeat client
- * @param plist The plist to store the received data
- *
- * @return HEARTBEAT_E_SUCCESS on success,
- *  HEARTBEAT_E_INVALID_ARG when client or plist is NULL
- */
 heartbeat_error_t heartbeat_receive(heartbeat_client_t client, plist_t * plist)
 {
 	return heartbeat_receive_with_timeout(client, plist, 1000);
 }
 
-/**
- * Receives a plist using the given heartbeat client.
- *
- * @param client The heartbeat client to use for receiving
- * @param plist pointer to a plist_t that will point to the received plist
- *      upon successful return
- * @param timeout Maximum time in milliseconds to wait for data.
- *
- * @return HEARTBEAT_E_SUCCESS on success,
- *      HEARTBEAT_E_INVALID_ARG when client or *plist is NULL,
- *      HEARTBEAT_E_PLIST_ERROR when the received data cannot be
- *      converted to a plist, HEARTBEAT_E_MUX_ERROR when a
- *      communication error occurs, or HEARTBEAT_E_UNKNOWN_ERROR
- *      when an unspecified error occurs.
- */
 heartbeat_error_t heartbeat_receive_with_timeout(heartbeat_client_t client, plist_t * plist, uint32_t timeout_ms)
 {
 	heartbeat_error_t res = HEARTBEAT_E_UNKNOWN_ERROR;
diff --git a/src/house_arrest.c b/src/house_arrest.c
index 9aaad34..4158368 100644
--- a/src/house_arrest.c
+++ b/src/house_arrest.c
@@ -55,17 +55,6 @@ static house_arrest_error_t house_arrest_error(property_list_service_error_t err
 	return HOUSE_ARREST_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the house_arrest service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will point to a newly allocated
- *     housearrest_client_t upon successful return.
- *
- * @return HOUSE_ARREST_E_SUCCESS on success, HOUSE_ARREST_E_INVALID_ARG when
- *     client is NULL, or an HOUSE_ARREST_E_* error code otherwise.
- */
 house_arrest_error_t house_arrest_client_new(idevice_t device, lockdownd_service_descriptor_t service, house_arrest_client_t *client)
 {
 	property_list_service_client_t plistclient = NULL;
@@ -82,19 +71,6 @@ house_arrest_error_t house_arrest_client_new(idevice_t device, lockdownd_service
 	return HOUSE_ARREST_E_SUCCESS;
 }
 
-/**
- * Starts a new house_arrest service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     house_arrest_client_t upon successful return. Must be freed using
- *     house_arrest_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return HOUSE_ARREST_E_SUCCESS on success, or an HOUSE_ARREST_E_* error
- *     code otherwise.
- */
 house_arrest_error_t house_arrest_client_start_service(idevice_t device, house_arrest_client_t * client, const char* label)
 {
 	house_arrest_error_t err = HOUSE_ARREST_E_UNKNOWN_ERROR;
@@ -102,20 +78,6 @@ house_arrest_error_t house_arrest_client_start_service(idevice_t device, house_a
 	return err;
 }
 
-/**
- * Disconnects an house_arrest client from the device and frees up the
- * house_arrest client data.
- *
- * @note After using afc_client_new_from_house_arrest_client(), make sure
- *     you call afc_client_free() before calling this function to ensure
- *     a proper cleanup. Do not call this function if you still need to
- *     perform AFC operations since it will close the connection.
- *
- * @param client The house_arrest client to disconnect and free.
- *
- * @return HOUSE_ARREST_E_SUCCESS on success, HOUSE_ARREST_E_INVALID_ARG when
- *     client is NULL, or an HOUSE_ARREST_E_* error code otherwise.
- */
 house_arrest_error_t house_arrest_client_free(house_arrest_client_t client)
 {
 	if (!client)
@@ -131,23 +93,6 @@ house_arrest_error_t house_arrest_client_free(house_arrest_client_t client)
 	return err;
 }
 
-/**
- * Sends a generic request to the connected house_arrest service.
- *
- * @param client The house_arrest client to use.
- * @param dict The request to send as a plist of type PLIST_DICT.
- *
- * @note If this function returns HOUSE_ARREST_E_SUCCESS it does not mean
- *     that the request was successful. To check for success or failure you
- *     need to call house_arrest_get_result().
- * @see house_arrest_get_result
- *
- * @return HOUSE_ARREST_E_SUCCESS if the request was successfully sent,
- *     HOUSE_ARREST_E_INVALID_ARG if client or dict is invalid,
- *     HOUSE_ARREST_E_PLIST_ERROR if dict is not a plist of type PLIST_DICT,
- *     HOUSE_ARREST_E_INVALID_MODE if the client is not in the correct mode,
- *     or HOUSE_ARREST_E_CONN_FAILED if a connection error occured.
- */
 house_arrest_error_t house_arrest_send_request(house_arrest_client_t client, plist_t dict)
 {
 	if (!client || !client->parent || !dict)
@@ -164,25 +109,6 @@ house_arrest_error_t house_arrest_send_request(house_arrest_client_t client, pli
 	return res;
 }
 
-/**
- * Send a command to the connected house_arrest service.
- * Calls house_arrest_send_request() internally.
- *
- * @param client The house_arrest client to use.
- * @param command The command to send. Currently, only VendContainer and
- *     VendDocuments are known.
- * @param appid The application identifier to pass along with the .
- *
- * @note If this function returns HOUSE_ARREST_E_SUCCESS it does not mean
- *     that the command was successful. To check for success or failure you
- *     need to call house_arrest_get_result().
- * @see house_arrest_get_result
- *
- * @return HOUSE_ARREST_E_SUCCESS if the command was successfully sent,
- *     HOUSE_ARREST_E_INVALID_ARG if client, command, or appid is invalid,
- *     HOUSE_ARREST_E_INVALID_MODE if the client is not in the correct mode,
- *     or HOUSE_ARREST_E_CONN_FAILED if a connection error occured.
- */
 house_arrest_error_t house_arrest_send_command(house_arrest_client_t client, const char *command, const char *appid)
 {
 	if (!client || !client->parent || !command || !appid)
@@ -203,20 +129,6 @@ house_arrest_error_t house_arrest_send_command(house_arrest_client_t client, con
 	return res;
 }
 
-/**
- * Retrieves the result of a previously sent house_arrest_request_* request.
- *
- * @param client The house_arrest client to use
- * @param dict Pointer that will be set to a plist containing the result to
- *     the last performed operation. It holds a key 'Status' with the value
- *     'Complete' on success or a key 'Error' with an error description as
- *     value. The caller is responsible for freeing the returned plist.
- *
- * @return HOUSE_ARREST_E_SUCCESS if a result plist was retrieved,
- *     HOUSE_ARREST_E_INVALID_ARG if client is invalid,
- *     HOUSE_ARREST_E_INVALID_MODE if the client is not in the correct mode,
- *     or HOUSE_ARREST_E_CONN_FAILED if a connection error occured.
- */
 house_arrest_error_t house_arrest_get_result(house_arrest_client_t client, plist_t *dict)
 {
 	if (!client || !client->parent)
@@ -235,25 +147,6 @@ house_arrest_error_t house_arrest_get_result(house_arrest_client_t client, plist
 	return res;
 }
 
-/**
- * Creates an AFC client using the given house_arrest client's connection
- * allowing file access to a specific application directory requested by
- * functions like house_arrest_request_vendor_documents().
- *
- * @param client The house_arrest client to use.
- * @param afc_client Pointer that will be set to a newly allocated afc_client_t
- *     upon successful return.
- *
- * @note After calling this function the house_arrest client will go in an
- *     AFC mode that will only allow calling house_arrest_client_free().
- *     Only call house_arrest_client_free() if all AFC operations have
- *     completed since it will close the connection.
- *
- * @return AFC_E_SUCCESS if the afc client was successfully created,
- *     AFC_E_INVALID_ARG if client is invalid or was already used to create
- *     an afc client, or an AFC_E_* error code returned by
- *     afc_client_new_with_service_client().
- */
 afc_error_t afc_client_new_from_house_arrest_client(house_arrest_client_t client, afc_client_t *afc_client)
 {
 	if (!client || !client->parent || (client->mode == HOUSE_ARREST_CLIENT_MODE_AFC)) {
diff --git a/src/idevice.c b/src/idevice.c
index 0577815..eed02fc 100644
--- a/src/idevice.c
+++ b/src/idevice.c
@@ -142,16 +142,6 @@ static void usbmux_event_cb(const usbmuxd_event_t *event, void *user_data)
 	}
 }
 
-/**
- * Register a callback function that will be called when device add/remove
- * events occur.
- *
- * @param callback Callback function to call.
- * @param user_data Application-specific data passed as parameter
- *   to the registered callback function.
- *
- * @return IDEVICE_E_SUCCESS on success or an error value when an error occured.
- */
 idevice_error_t idevice_event_subscribe(idevice_event_cb_t callback, void *user_data)
 {
 	event_cb = callback;
@@ -164,12 +154,6 @@ idevice_error_t idevice_event_subscribe(idevice_event_cb_t callback, void *user_
 	return IDEVICE_E_SUCCESS;
 }
 
-/**
- * Release the event callback function that has been registered with
- *  idevice_event_subscribe().
- *
- * @return IDEVICE_E_SUCCESS on success or an error value when an error occured.
- */
 idevice_error_t idevice_event_unsubscribe()
 {
 	event_cb = NULL;
@@ -181,15 +165,6 @@ idevice_error_t idevice_event_unsubscribe()
 	return IDEVICE_E_SUCCESS;
 }
 
-/**
- * Get a list of currently available devices.
- *
- * @param devices List of udids of devices that are currently available.
- *   This list is terminated by a NULL pointer.
- * @param count Number of devices found.
- *
- * @return IDEVICE_E_SUCCESS on success or an error value when an error occured.
- */
 idevice_error_t idevice_get_device_list(char ***devices, int *count)
 {
 	usbmuxd_device_info_t *dev_list;
@@ -220,13 +195,6 @@ idevice_error_t idevice_get_device_list(char ***devices, int *count)
 	return IDEVICE_E_SUCCESS;
 }
 
-/**
- * Free a list of device udids.
- *
- * @param devices List of udids to free.
- *
- * @return Always returnes IDEVICE_E_SUCCESS.
- */
 idevice_error_t idevice_device_list_free(char **devices)
 {
 	if (devices) {
@@ -240,19 +208,6 @@ idevice_error_t idevice_device_list_free(char **devices)
 	return IDEVICE_E_SUCCESS;
 }
 
-/**
- * Creates an idevice_t structure for the device specified by udid,
- *  if the device is available.
- *
- * @note The resulting idevice_t structure has to be freed with
- * idevice_free() if it is no longer used.
- *
- * @param device Upon calling this function, a pointer to a location of type
- *  idevice_t. On successful return, this location will be populated.
- * @param udid The UDID to match.
- *
- * @return IDEVICE_E_SUCCESS if ok, otherwise an error code.
- */
 idevice_error_t idevice_new(idevice_t * device, const char *udid)
 {
 	usbmuxd_device_info_t muxdev;
@@ -270,13 +225,6 @@ idevice_error_t idevice_new(idevice_t * device, const char *udid)
 	return IDEVICE_E_NO_DEVICE;
 }
 
-/**
- * Cleans up an idevice structure, then frees the structure itself.
- * This is a library-level function; deals directly with the device to tear
- *  down relations, but otherwise is mostly internal.
- * 
- * @param device idevice_t to free.
- */
 idevice_error_t idevice_free(idevice_t device)
 {
 	if (!device)
@@ -297,16 +245,6 @@ idevice_error_t idevice_free(idevice_t device)
 	return ret;
 }
 
-/**
- * Set up a connection to the given device.
- *
- * @param device The device to connect to.
- * @param port The destination port to connect to.
- * @param connection Pointer to an idevice_connection_t that will be filled
- *   with the necessary data of the connection.
- *
- * @return IDEVICE_E_SUCCESS if ok, otherwise an error code.
- */
 idevice_error_t idevice_connect(idevice_t device, uint16_t port, idevice_connection_t *connection)
 {
 	if (!device) {
@@ -333,13 +271,6 @@ idevice_error_t idevice_connect(idevice_t device, uint16_t port, idevice_connect
 	return IDEVICE_E_UNKNOWN_ERROR;
 }
 
-/**
- * Disconnect from the device and clean up the connection structure.
- *
- * @param connection The connection to close.
- *
- * @return IDEVICE_E_SUCCESS if ok, otherwise an error code.
- */
 idevice_error_t idevice_disconnect(idevice_connection_t connection)
 {
 	if (!connection) {
@@ -390,17 +321,6 @@ static idevice_error_t internal_connection_send(idevice_connection_t connection,
 
 }
 
-/**
- * Send data to a device via the given connection.
- *
- * @param connection The connection to send data over.
- * @param data Buffer with data to send.
- * @param len Size of the buffer to send.
- * @param sent_bytes Pointer to an uint32_t that will be filled
- *   with the number of bytes actually sent.
- *
- * @return IDEVICE_E_SUCCESS if ok, otherwise an error code.
- */
 idevice_error_t idevice_connection_send(idevice_connection_t connection, const char *data, uint32_t len, uint32_t *sent_bytes)
 {
 	if (!connection || !data || (connection->ssl_data && !connection->ssl_data->session)) {
@@ -447,21 +367,6 @@ static idevice_error_t internal_connection_receive_timeout(idevice_connection_t
 	return IDEVICE_E_UNKNOWN_ERROR;
 }
 
-/**
- * Receive data from a device via the given connection.
- * This function will return after the given timeout even if no data has been
- * received.
- *
- * @param connection The connection to receive data from.
- * @param data Buffer that will be filled with the received data.
- *   This buffer has to be large enough to hold len bytes.
- * @param len Buffer size or number of bytes to receive.
- * @param recv_bytes Number of bytes actually received.
- * @param timeout Timeout in milliseconds after which this function should
- *   return even if no data has been received.
- *
- * @return IDEVICE_E_SUCCESS if ok, otherwise an error code.
- */
 idevice_error_t idevice_connection_receive_timeout(idevice_connection_t connection, char *data, uint32_t len, uint32_t *recv_bytes, unsigned int timeout)
 {
 	if (!connection || (connection->ssl_data && !connection->ssl_data->session)) {
@@ -516,19 +421,6 @@ static idevice_error_t internal_connection_receive(idevice_connection_t connecti
 	return IDEVICE_E_UNKNOWN_ERROR;
 }
 
-/**
- * Receive data from a device via the given connection.
- * This function is like idevice_connection_receive_timeout, but with a
- * predefined reasonable timeout.
- *
- * @param connection The connection to receive data from.
- * @param data Buffer that will be filled with the received data.
- *   This buffer has to be large enough to hold len bytes.
- * @param len Buffer size or number of bytes to receive.
- * @param recv_bytes Number of bytes actually received.
- *
- * @return IDEVICE_E_SUCCESS if ok, otherwise an error code.
- */
 idevice_error_t idevice_connection_receive(idevice_connection_t connection, char *data, uint32_t len, uint32_t *recv_bytes)
 {
 	if (!connection || (connection->ssl_data && !connection->ssl_data->session)) {
@@ -552,9 +444,6 @@ idevice_error_t idevice_connection_receive(idevice_connection_t connection, char
 	return internal_connection_receive(connection, data, len, recv_bytes);
 }
 
-/**
- * Gets the handle of the device. Depends on the connection type.
- */
 idevice_error_t idevice_get_handle(idevice_t device, uint32_t *handle)
 {
 	if (!device)
@@ -569,9 +458,6 @@ idevice_error_t idevice_get_handle(idevice_t device, uint32_t *handle)
 	return IDEVICE_E_UNKNOWN_ERROR;
 }
 
-/**
- * Gets the unique id for the device.
- */
 idevice_error_t idevice_get_udid(idevice_t device, char **udid)
 {
 	if (!device || !udid)
@@ -741,15 +627,6 @@ static int internal_cert_callback(gnutls_session_t session, const gnutls_datum_t
 }
 #endif
 
-/**
- * Enables SSL for the given connection.
- *
- * @param connection The connection to enable SSL for.
- *
- * @return IDEVICE_E_SUCCESS on success, IDEVICE_E_INVALID_ARG when connection
- *     is NULL or connection->ssl_data is non-NULL, or IDEVICE_E_SSL_ERROR when
- *     SSL initialization, setup, or handshake fails.
- */
 idevice_error_t idevice_connection_enable_ssl(idevice_connection_t connection)
 {
 	if (!connection || connection->ssl_data)
@@ -888,15 +765,6 @@ idevice_error_t idevice_connection_enable_ssl(idevice_connection_t connection)
 	return ret;
 }
 
-/**
- * Disable SSL for the given connection.
- *
- * @param connection The connection to disable SSL for.
- *
- * @return IDEVICE_E_SUCCESS on success, IDEVICE_E_INVALID_ARG when connection
- *     is NULL. This function also returns IDEVICE_E_SUCCESS when SSL is not
- *     enabled and does no further error checking on cleanup.
- */
 idevice_error_t idevice_connection_disable_ssl(idevice_connection_t connection)
 {
 	if (!connection)
diff --git a/src/installation_proxy.c b/src/installation_proxy.c
index 109df10..e3a8103 100644
--- a/src/installation_proxy.c
+++ b/src/installation_proxy.c
@@ -86,17 +86,6 @@ static instproxy_error_t instproxy_error(property_list_service_error_t err)
 	return INSTPROXY_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the installation_proxy service on the specified device.
- *
- * @param device The device to connect to
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will be set to a newly allocated
- *     instproxy_client_t upon successful return.
- *
- * @return INSTPROXY_E_SUCCESS on success, or an INSTPROXY_E_* error value
- *     when an error occured.
- */
 instproxy_error_t instproxy_client_new(idevice_t device, lockdownd_service_descriptor_t service, instproxy_client_t *client)
 {
 	property_list_service_client_t plistclient = NULL;
@@ -114,19 +103,6 @@ instproxy_error_t instproxy_client_new(idevice_t device, lockdownd_service_descr
 	return INSTPROXY_E_SUCCESS;
 }
 
-/**
- * Starts a new installation_proxy service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     instproxy_client_t upon successful return. Must be freed using
- *     instproxy_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return INSTPROXY_E_SUCCESS on success, or an INSTPROXY_E_* error
- *     code otherwise.
- */
 instproxy_error_t instproxy_client_start_service(idevice_t device, instproxy_client_t * client, const char* label)
 {
 	instproxy_error_t err = INSTPROXY_E_UNKNOWN_ERROR;
@@ -134,15 +110,6 @@ instproxy_error_t instproxy_client_start_service(idevice_t device, instproxy_cli
 	return err;
 }
 
-/**
- * Disconnects an installation_proxy client from the device and frees up the
- * installation_proxy client data.
- *
- * @param client The installation_proxy client to disconnect and free.
- *
- * @return INSTPROXY_E_SUCCESS on success
- *      or INSTPROXY_E_INVALID_ARG if client is NULL.
- */
 instproxy_error_t instproxy_client_free(instproxy_client_t client)
 {
 	if (!client)
@@ -195,20 +162,6 @@ static instproxy_error_t instproxy_send_command(instproxy_client_t client, const
 	return err;
 }
 
-/**
- * List installed applications. This function runs synchronously.
- *
- * @param client The connected installation_proxy client
- * @param client_options The client options to use, as PLIST_DICT, or NULL.
- *        Valid client options include:
- *          "ApplicationType" -> "User"
- *          "ApplicationType" -> "System"
- * @param result Pointer that will be set to a plist that will hold an array
- *        of PLIST_DICT holding information about the applications found.
- *
- * @return INSTPROXY_E_SUCCESS on success or an INSTPROXY_E_* error value if
- *     an error occured.
- */
 instproxy_error_t instproxy_browse(instproxy_client_t client, plist_t client_options, plist_t *result)
 {
 	if (!client || !client->parent || !result)
@@ -461,85 +414,16 @@ static instproxy_error_t instproxy_install_or_upgrade(instproxy_client_t client,
 	return instproxy_create_status_updater(client, status_cb, command, user_data);
 }
 
-/**
- * Install an application on the device.
- *
- * @param client The connected installation_proxy client
- * @param pkg_path Path of the installation package (inside the AFC jail)
- * @param client_options The client options to use, as PLIST_DICT, or NULL.
- *        Valid options include:
- *          "iTunesMetadata" -> PLIST_DATA
- *          "ApplicationSINF" -> PLIST_DATA
- *          "PackageType" -> "Developer"
- *        If PackageType -> Developer is specified, then pkg_path points to
- *        an .app directory instead of an install package.
- * @param status_cb Callback function for progress and status information. If
- *        NULL is passed, this function will run synchronously.
- * @param user_data Callback data passed to status_cb.
- *
- * @return INSTPROXY_E_SUCCESS on success or an INSTPROXY_E_* error value if
- *     an error occured.
- *
- * @note If a callback function is given (async mode), this function returns
- *     INSTPROXY_E_SUCCESS immediately if the status updater thread has been
- *     created successfully; any error occuring during the operation has to be
- *     handled inside the specified callback function.
- */
 instproxy_error_t instproxy_install(instproxy_client_t client, const char *pkg_path, plist_t client_options, instproxy_status_cb_t status_cb, void *user_data)
 {
 	return instproxy_install_or_upgrade(client, pkg_path, client_options, status_cb, "Install", user_data);
 }
 
-/**
- * Upgrade an application on the device. This function is nearly the same as
- * instproxy_install; the difference is that the installation progress on the
- * device is faster if the application is already installed.
- *
- * @param client The connected installation_proxy client
- * @param pkg_path Path of the installation package (inside the AFC jail)
- * @param client_options The client options to use, as PLIST_DICT, or NULL.
- *        Valid options include:
- *          "iTunesMetadata" -> PLIST_DATA
- *          "ApplicationSINF" -> PLIST_DATA
- *          "PackageType" -> "Developer"
- *        If PackageType -> Developer is specified, then pkg_path points to
- *        an .app directory instead of an install package.
- * @param status_cb Callback function for progress and status information. If
- *        NULL is passed, this function will run synchronously.
- * @param user_data Callback data passed to status_cb.
- *
- * @return INSTPROXY_E_SUCCESS on success or an INSTPROXY_E_* error value if
- *     an error occured.
- *
- * @note If a callback function is given (async mode), this function returns
- *     INSTPROXY_E_SUCCESS immediately if the status updater thread has been
- *     created successfully; any error occuring during the operation has to be
- *     handled inside the specified callback function.
- */
 instproxy_error_t instproxy_upgrade(instproxy_client_t client, const char *pkg_path, plist_t client_options, instproxy_status_cb_t status_cb, void *user_data)
 {
 	return instproxy_install_or_upgrade(client, pkg_path, client_options, status_cb, "Upgrade", user_data);
 }
 
-/**
- * Uninstall an application from the device.
- *
- * @param client The connected installation proxy client
- * @param appid ApplicationIdentifier of the app to uninstall
- * @param client_options The client options to use, as PLIST_DICT, or NULL.
- *        Currently there are no known client options, so pass NULL here.
- * @param status_cb Callback function for progress and status information. If
- *        NULL is passed, this function will run synchronously.
- * @param user_data Callback data passed to status_cb.
- *
- * @return INSTPROXY_E_SUCCESS on success or an INSTPROXY_E_* error value if
- *     an error occured.
- *
- * @note If a callback function is given (async mode), this function returns
- *     INSTPROXY_E_SUCCESS immediately if the status updater thread has been
- *     created successfully; any error occuring during the operation has to be
- *     handled inside the specified callback function.
- */
 instproxy_error_t instproxy_uninstall(instproxy_client_t client, const char *appid, plist_t client_options, instproxy_status_cb_t status_cb, void *user_data)
 {
 	if (!client || !client->parent || !appid) {
@@ -564,20 +448,6 @@ instproxy_error_t instproxy_uninstall(instproxy_client_t client, const char *app
 	return instproxy_create_status_updater(client, status_cb, "Uninstall", user_data);
 }
 
-/**
- * List archived applications. This function runs synchronously.
- *
- * @see instproxy_archive
- *
- * @param client The connected installation_proxy client
- * @param client_options The client options to use, as PLIST_DICT, or NULL.
- *        Currently there are no known client options, so pass NULL here.
- * @param result Pointer that will be set to a plist containing a PLIST_DICT
- *        holding information about the archived applications found.
- *
- * @return INSTPROXY_E_SUCCESS on success or an INSTPROXY_E_* error value if
- *     an error occured.
- */
 instproxy_error_t instproxy_lookup_archives(instproxy_client_t client, plist_t client_options, plist_t *result)
 {
 	if (!client || !client->parent || !result)
@@ -604,30 +474,6 @@ leave_unlock:
 	return res;
 }
 
-/**
- * Archive an application on the device.
- * This function tells the device to make an archive of the specified
- * application. This results in the device creating a ZIP archive in the
- * 'ApplicationArchives' directory and uninstalling the application.
- *
- * @param client The connected installation proxy client
- * @param appid ApplicationIdentifier of the app to archive.
- * @param client_options The client options to use, as PLIST_DICT, or NULL.
- *        Valid options include:
- *          "SkipUninstall" -> Boolean
- *          "ArchiveType" -> "ApplicationOnly" 
- * @param status_cb Callback function for progress and status information. If
- *        NULL is passed, this function will run synchronously.
- * @param user_data Callback data passed to status_cb.
- *
- * @return INSTPROXY_E_SUCCESS on success or an INSTPROXY_E_* error value if
- *     an error occured.
- *
- * @note If a callback function is given (async mode), this function returns
- *     INSTPROXY_E_SUCCESS immediately if the status updater thread has been
- *     created successfully; any error occuring during the operation has to be
- *     handled inside the specified callback function.
- */
 instproxy_error_t instproxy_archive(instproxy_client_t client, const char *appid, plist_t client_options, instproxy_status_cb_t status_cb, void *user_data)
 {
 	if (!client || !client->parent || !appid)
@@ -648,27 +494,6 @@ instproxy_error_t instproxy_archive(instproxy_client_t client, const char *appid
 	return instproxy_create_status_updater(client, status_cb, "Archive", user_data);
 }
 
-/**
- * Restore a previously archived application on the device.
- * This function is the counterpart to instproxy_archive.
- * @see instproxy_archive
- *
- * @param client The connected installation proxy client
- * @param appid ApplicationIdentifier of the app to restore.
- * @param client_options The client options to use, as PLIST_DICT, or NULL.
- *        Currently there are no known client options, so pass NULL here.
- * @param status_cb Callback function for progress and status information. If
- *        NULL is passed, this function will run synchronously.
- * @param user_data Callback data passed to status_cb.
- *
- * @return INSTPROXY_E_SUCCESS on success or an INSTPROXY_E_* error value if
- *     an error occured.
- *
- * @note If a callback function is given (async mode), this function returns
- *     INSTPROXY_E_SUCCESS immediately if the status updater thread has been
- *     created successfully; any error occuring during the operation has to be
- *     handled inside the specified callback function.
- */
 instproxy_error_t instproxy_restore(instproxy_client_t client, const char *appid, plist_t client_options, instproxy_status_cb_t status_cb, void *user_data)
 {
 	if (!client || !client->parent || !appid)
@@ -689,27 +514,6 @@ instproxy_error_t instproxy_restore(instproxy_client_t client, const char *appid
 	return instproxy_create_status_updater(client, status_cb, "Restore", user_data);
 }
 
-/**
- * Removes a previously archived application from the device.
- * This function removes the ZIP archive from the 'ApplicationArchives'
- * directory.
- *
- * @param client The connected installation proxy client
- * @param appid ApplicationIdentifier of the archived app to remove.
- * @param client_options The client options to use, as PLIST_DICT, or NULL.
- *        Currently there are no known client options, so passing NULL is fine.
- * @param status_cb Callback function for progress and status information. If
- *        NULL is passed, this function will run synchronously.
- * @param user_data Callback data passed to status_cb.
- *
- * @return INSTPROXY_E_SUCCESS on success or an INSTPROXY_E_* error value if
- *     an error occured.
- *
- * @note If a callback function is given (async mode), this function returns
- *     INSTPROXY_E_SUCCESS immediately if the status updater thread has been
- *     created successfully; any error occuring during the operation has to be
- *     handled inside the specified callback function.
- */
 instproxy_error_t instproxy_remove_archive(instproxy_client_t client, const char *appid, plist_t client_options, instproxy_status_cb_t status_cb, void *user_data)
 {
 	if (!client || !client->parent || !appid)
@@ -730,26 +534,11 @@ instproxy_error_t instproxy_remove_archive(instproxy_client_t client, const char
 	return instproxy_create_status_updater(client, status_cb, "RemoveArchive", user_data);
 }
 
-/**
- * Create a new client_options plist.
- *
- * @return A new plist_t of type PLIST_DICT. 
- */
 plist_t instproxy_client_options_new()
 {
 	return plist_new_dict();
 }
 
-/**
- * Add one or more new key:value pairs to the given client_options.
- *
- * @param client_options The client options to modify.
- * @param ... KEY, VALUE, [KEY, VALUE], NULL
- *
- * @note The keys and values passed are expected to be strings, except for the
- *       keys "ApplicationSINF", "iTunesMetadata", "ReturnAttributes" which are
- *       expecting a plist_t node as value and "SkipUninstall" expects int.
- */
 void instproxy_client_options_add(plist_t client_options, ...)
 {
 	if (!client_options)
@@ -783,12 +572,6 @@ void instproxy_client_options_add(plist_t client_options, ...)
 	va_end(args);
 }
 
-/**
- * Free client_options plist.
- *
- * @param client_options The client options plist to free. Does nothing if NULL
- *        is passed.
- */
 void instproxy_client_options_free(plist_t client_options)
 {
 	if (client_options) {
@@ -796,21 +579,6 @@ void instproxy_client_options_free(plist_t client_options)
 	}
 }
 
-/**
- * Query the device for the path of an application.
- *
- * @param client The connected installation proxy client.
- * @param appid ApplicationIdentifier of app to retrieve the path for.
- * @param path Pointer to store the device path for the application
- *        which is set to NULL if it could not be determined.
- *
- * @return INSTPROXY_E_SUCCESS on success, INSTPROXY_E_OP_FAILED if
- *         the path could not be determined or an INSTPROXY_E_* error
- *         value if an error occured.
- *
- * @note This implementation browses all applications and matches the
- *       right entry by the application identifier.
- */
 instproxy_error_t instproxy_client_get_path_for_bundle_identifier(instproxy_client_t client, const char* appid, char** path)
 {
 	if (!client || !client->parent || !appid)
diff --git a/src/lockdown.c b/src/lockdown.c
index 9b579e8..cf03e0f 100644
--- a/src/lockdown.c
+++ b/src/lockdown.c
@@ -154,16 +154,6 @@ static void plist_dict_add_label(plist_t plist, const char *label)
 	}
 }
 
-/**
- * Closes the lockdownd session by sending the StopSession request.
- *
- * @see lockdownd_start_session
- *
- * @param client The lockdown client
- * @param session_id The id of a running session
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL
- */
 lockdownd_error_t lockdownd_stop_session(lockdownd_client_t client, const char *session_id)
 {
 	if (!client)
@@ -247,14 +237,6 @@ static lockdownd_error_t lockdownd_client_free_simple(lockdownd_client_t client)
 	return ret;
 }
 
-/**
- * Closes the lockdownd client session if one is running and frees up the
- * lockdownd_client struct.
- *
- * @param client The lockdown client
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL
- */
 lockdownd_error_t lockdownd_client_free(lockdownd_client_t client)
 {
 	if (!client)
@@ -271,13 +253,6 @@ lockdownd_error_t lockdownd_client_free(lockdownd_client_t client)
 	return ret;
 }
 
-/**
- * Sets the label to send for requests to lockdownd.
- *
- * @param client The lockdown client
- * @param label The label to set or NULL to disable sending a label
- *
- */
 void lockdownd_client_set_label(lockdownd_client_t client, const char *label)
 {
 	if (client) {
@@ -288,15 +263,6 @@ void lockdownd_client_set_label(lockdownd_client_t client, const char *label)
 	}
 }
 
-/**
- * Receives a plist from lockdownd.
- *
- * @param client The lockdownd client
- * @param plist The plist to store the received data
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client or
- *  plist is NULL
- */
 lockdownd_error_t lockdownd_receive(lockdownd_client_t client, plist_t *plist)
 {
 	if (!client || !plist || (plist && *plist))
@@ -315,18 +281,6 @@ lockdownd_error_t lockdownd_receive(lockdownd_client_t client, plist_t *plist)
 	return ret;
 }
 
-/**
- * Sends a plist to lockdownd.
- *
- * @note This function is low-level and should only be used if you need to send
- *        a new type of message.
- *
- * @param client The lockdownd client
- * @param plist The plist to send
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client or
- *  plist is NULL
- */
 lockdownd_error_t lockdownd_send(lockdownd_client_t client, plist_t plist)
 {
 	if (!client || !plist)
@@ -342,15 +296,6 @@ lockdownd_error_t lockdownd_send(lockdownd_client_t client, plist_t plist)
 	return ret;
 }
 
-/**
- * Query the type of the service daemon. Depending on whether the device is
- * queried in normal mode or restore mode, different types will be returned.
- *
- * @param client The lockdownd client
- * @param type The type returned by the service daemon. Pass NULL to ignore.
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL
- */
 lockdownd_error_t lockdownd_query_type(lockdownd_client_t client, char **type)
 {
 	if (!client)
@@ -396,16 +341,6 @@ lockdownd_error_t lockdownd_query_type(lockdownd_client_t client, char **type)
 	return ret;
 }
 
-/**
- * Retrieves a preferences plist using an optional domain and/or key name.
- *
- * @param client An initialized lockdownd client.
- * @param domain The domain to query on or NULL for global domain
- * @param key The key name to request or NULL to query for all keys
- * @param value A plist node representing the result value node
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL
- */
 lockdownd_error_t lockdownd_get_value(lockdownd_client_t client, const char *domain, const char *key, plist_t *value)
 {
 	if (!client)
@@ -461,17 +396,6 @@ lockdownd_error_t lockdownd_get_value(lockdownd_client_t client, const char *dom
 	return ret;
 }
 
-/**
- * Sets a preferences value using a plist and optional by domain and/or key name.
- *
- * @param client an initialized lockdownd client.
- * @param domain the domain to query on or NULL for global domain
- * @param key the key name to set the value or NULL to set a value dict plist
- * @param value a plist node of any node type representing the value to set
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client or 
- *  value is NULL
- */
 lockdownd_error_t lockdownd_set_value(lockdownd_client_t client, const char *domain, const char *key, plist_t value)
 {
 	if (!client || !value)
@@ -520,17 +444,6 @@ lockdownd_error_t lockdownd_set_value(lockdownd_client_t client, const char *dom
 	return ret;
 }
 
-/**
- * Removes a preference node by domain and/or key name.
- *
- * @note: Use with caution as this could remove vital information on the device
- *
- * @param client An initialized lockdownd client.
- * @param domain The domain to query on or NULL for global domain
- * @param key The key name to remove or NULL remove all keys for the current domain
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL
- */
 lockdownd_error_t lockdownd_remove_value(lockdownd_client_t client, const char *domain, const char *key)
 {
 	if (!client)
@@ -578,15 +491,6 @@ lockdownd_error_t lockdownd_remove_value(lockdownd_client_t client, const char *
 	return ret;
 }
 
-/**
- * Returns the unique id of the device from lockdownd.
- *
- * @param client An initialized lockdownd client.
- * @param udid Holds the unique id of the device. The caller is responsible
- *  for freeing the memory.
- *
- * @return LOCKDOWN_E_SUCCESS on success
- */
 lockdownd_error_t lockdownd_get_device_udid(lockdownd_client_t client, char **udid)
 {
 	lockdownd_error_t ret = LOCKDOWN_E_UNKNOWN_ERROR;
@@ -633,15 +537,6 @@ static lockdownd_error_t lockdownd_get_device_public_key_as_key_data(lockdownd_c
 	return ret;
 }
 
-/**
- * Retrieves the name of the device from lockdownd set by the user.
- *
- * @param client An initialized lockdownd client.
- * @param device_name Holds the name of the device. The caller is
- *  responsible for freeing the memory.
- *
- * @return LOCKDOWN_E_SUCCESS on success
- */
 lockdownd_error_t lockdownd_get_device_name(lockdownd_client_t client, char **device_name)
 {
 	lockdownd_error_t ret = LOCKDOWN_E_UNKNOWN_ERROR;
@@ -659,21 +554,6 @@ lockdownd_error_t lockdownd_get_device_name(lockdownd_client_t client, char **de
 	return ret;
 }
 
-/**
- * Creates a new lockdownd client for the device.
- *
- * @note This function does not pair with the device or start a session. This
- *  has to be done manually by the caller after the client is created.
- *  The device disconnects automatically if the lockdown connection idles
- *  for more than 10 seconds. Make sure to call lockdownd_client_free() as soon
- *  as the connection is no longer needed.
- *
- * @param device The device to create a lockdownd client for
- * @param client The pointer to the location of the new lockdownd_client
- * @param label The label to use for communication. Usually the program name.
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL
- */
 lockdownd_error_t lockdownd_client_new(idevice_t device, lockdownd_client_t *client, const char *label)
 {
 	if (!client)
@@ -707,23 +587,6 @@ lockdownd_error_t lockdownd_client_new(idevice_t device, lockdownd_client_t *cli
 	return LOCKDOWN_E_SUCCESS;
 }
 
-/**
- * Creates a new lockdownd client for the device and starts initial handshake.
- * The handshake consists out of query_type, validate_pair, pair and
- * start_session calls. It uses the internal pairing record management.
- *
- * @note The device disconnects automatically if the lockdown connection idles
- *  for more than 10 seconds. Make sure to call lockdownd_client_free() as soon
- *  as the connection is no longer needed.
- *
- * @param device The device to create a lockdownd client for
- * @param client The pointer to the location of the new lockdownd_client
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL,
- *  LOCKDOWN_E_INVALID_CONF if configuration data is wrong
- */
 lockdownd_error_t lockdownd_client_new_with_handshake(idevice_t device, lockdownd_client_t *client, const char *label)
 {
 	if (!client)
@@ -1091,73 +954,21 @@ static lockdownd_error_t lockdownd_do_pair(lockdownd_client_t client, lockdownd_
 	return ret;
 }
 
-/** 
- * Pairs the device using the supplied pair record.
- *
- * @param client The lockdown client to pair with.
- * @param pair_record The pair record to use for pairing. If NULL is passed, then
- *    the pair records from the current machine are used. New records will be
- *    generated automatically when pairing is done for the first time.
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL,
- *  LOCKDOWN_E_PLIST_ERROR if the pair_record certificates are wrong,
- *  LOCKDOWN_E_PAIRING_FAILED if the pairing failed,
- *  LOCKDOWN_E_PASSWORD_PROTECTED if the device is password protected,
- *  LOCKDOWN_E_INVALID_HOST_ID if the device does not know the caller's host id
- */
 lockdownd_error_t lockdownd_pair(lockdownd_client_t client, lockdownd_pair_record_t pair_record)
 {
 	return lockdownd_do_pair(client, pair_record, "Pair");
 }
 
-/** 
- * Validates if the device is paired with the given HostID. If succeeded them
- * specified host will become trusted host of the device indicated by the 
- * lockdownd preference named TrustedHostAttached. Otherwise the host must because
- * paired using lockdownd_pair() first.
- *
- * @param client The lockdown client to pair with.
- * @param pair_record The pair record to validate pairing with. If NULL is
- *    passed, then the pair record is read from the internal pairing record
- *    management.
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL,
- *  LOCKDOWN_E_PLIST_ERROR if the pair_record certificates are wrong,
- *  LOCKDOWN_E_PAIRING_FAILED if the pairing failed,
- *  LOCKDOWN_E_PASSWORD_PROTECTED if the device is password protected,
- *  LOCKDOWN_E_INVALID_HOST_ID if the device does not know the caller's host id
- */
 lockdownd_error_t lockdownd_validate_pair(lockdownd_client_t client, lockdownd_pair_record_t pair_record)
 {
 	return lockdownd_do_pair(client, pair_record, "ValidatePair");
 }
 
-/** 
- * Unpairs the device with the given HostID and removes the pairing records
- * from the device and host if the internal pairing record management is used.
- *
- * @param client The lockdown client to pair with.
- * @param pair_record The pair record to use for unpair. If NULL is passed, then
- *    the pair records from the current machine are used.
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL,
- *  LOCKDOWN_E_PLIST_ERROR if the pair_record certificates are wrong,
- *  LOCKDOWN_E_PAIRING_FAILED if the pairing failed,
- *  LOCKDOWN_E_PASSWORD_PROTECTED if the device is password protected,
- *  LOCKDOWN_E_INVALID_HOST_ID if the device does not know the caller's host id
- */
 lockdownd_error_t lockdownd_unpair(lockdownd_client_t client, lockdownd_pair_record_t pair_record)
 {
 	return lockdownd_do_pair(client, pair_record, "Unpair");
 }
 
-/**
- * Tells the device to immediately enter recovery mode.
- *
- * @param client The lockdown client
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL
- */
 lockdownd_error_t lockdownd_enter_recovery(lockdownd_client_t client)
 {
 	if (!client)
@@ -1186,15 +997,6 @@ lockdownd_error_t lockdownd_enter_recovery(lockdownd_client_t client)
 	return ret;
 }
 
-/**
- * Sends the Goodbye request to lockdownd signaling the end of communication.
- *
- * @param client The lockdown client
- *
- * @return LOCKDOWN_E_SUCCESS on success, LOCKDOWN_E_INVALID_ARG when client
- *  is NULL, LOCKDOWN_E_PLIST_ERROR if the device did not acknowledge the
- *  request
- */
 lockdownd_error_t lockdownd_goodbye(lockdownd_client_t client)
 {
 	if (!client)
@@ -1228,19 +1030,6 @@ lockdownd_error_t lockdownd_goodbye(lockdownd_client_t client)
 	return ret;
 }
 
-/**
- * Opens a session with lockdownd and switches to SSL mode if device wants it.
- *
- * @param client The lockdownd client
- * @param host_id The HostID of the computer
- * @param session_id The new session_id of the created session
- * @param ssl_enabled Whether SSL communication is used in the session
- *
- * @return LOCKDOWN_E_SUCCESS on success, LOCKDOWN_E_INVALID_ARG when a client
- *  or host_id is NULL, LOCKDOWN_E_PLIST_ERROR if the response plist had errors,
- *  LOCKDOWN_E_INVALID_HOST_ID if the device does not know the supplied HostID,
- *  LOCKDOWN_E_SSL_ERROR if enabling SSL communication failed
- */
 lockdownd_error_t lockdownd_start_session(lockdownd_client_t client, const char *host_id, char **session_id, int *ssl_enabled)
 {
 	lockdownd_error_t ret = LOCKDOWN_E_SUCCESS;
@@ -1345,18 +1134,6 @@ lockdownd_error_t lockdownd_start_session(lockdownd_client_t client, const char
 	return ret;
 }
 
-/**
- * Requests to start a service and retrieve it's port on success.
- *
- * @param client The lockdownd client
- * @param identifier The identifier of the service to start
- * @param descriptor The service descriptor on success or NULL on failure
- 
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG if a parameter
- *  is NULL, LOCKDOWN_E_INVALID_SERVICE if the requested service is not known
- *  by the device, LOCKDOWN_E_START_SERVICE_FAILED if the service could not because
- *  started by the device
- */
 lockdownd_error_t lockdownd_start_service(lockdownd_client_t client, const char *identifier, lockdownd_service_descriptor_t *service)
 {
 	if (!client || !identifier || !service)
@@ -1442,24 +1219,7 @@ lockdownd_error_t lockdownd_start_service(lockdownd_client_t client, const char
 	return ret;
 }
 
-/**
- * Activates the device. Only works within an open session.
- * The ActivationRecord plist dictionary must be obtained using the
- * activation protocol requesting from Apple's https webservice.
- *
- * @see http://iphone-docs.org/doku.php?id=docs:protocols:activation
- *
- * @param client The lockdown client
- * @param activation_record The activation record plist dictionary
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client or
- *  activation_record is NULL, LOCKDOWN_E_NO_RUNNING_SESSION if no session is
- *  open, LOCKDOWN_E_PLIST_ERROR if the received plist is broken, 
- *  LOCKDOWN_E_ACTIVATION_FAILED if the activation failed, 
- *  LOCKDOWN_E_INVALID_ACTIVATION_RECORD if the device reports that the
- *  activation_record is invalid
- */
-lockdownd_error_t lockdownd_activate(lockdownd_client_t client, plist_t activation_record) 
+lockdownd_error_t lockdownd_activate(lockdownd_client_t client, plist_t activation_record)
 {
 	if (!client)
 		return LOCKDOWN_E_INVALID_ARG;
@@ -1510,16 +1270,6 @@ lockdownd_error_t lockdownd_activate(lockdownd_client_t client, plist_t activati
 	return ret;
 }
 
-/**
- * Deactivates the device, returning it to the locked “Activate with iTunes”
- * screen.
- *
- * @param client The lockdown client
- *
- * @return LOCKDOWN_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL,
- *  LOCKDOWN_E_NO_RUNNING_SESSION if no session is open, 
- *  LOCKDOWN_E_PLIST_ERROR if the received plist is broken
- */
 lockdownd_error_t lockdownd_deactivate(lockdownd_client_t client)
 {
 	if (!client)
@@ -1567,19 +1317,6 @@ static void str_remove_spaces(char *source)
 	*dest = 0;
 }
 
-/**
- * Calculates and returns the data classes the device supports from lockdownd.
- *
- * @param client An initialized lockdownd client.
- * @param classes A pointer to store an array of class names. The caller is responsible
- *  for freeing the memory which can be done using mobilesync_data_classes_free().
- * @param count The number of items in the classes array.
- *
- * @return LOCKDOWN_E_SUCCESS on success,
- *  LOCKDOWN_E_INVALID_ARG when client is NULL,
- *  LOCKDOWN_E_NO_RUNNING_SESSION if no session is open, 
- *  LOCKDOWN_E_PLIST_ERROR if the received plist is broken
- */
 lockdownd_error_t lockdownd_get_sync_data_classes(lockdownd_client_t client, char ***classes, int *count)
 {
 	if (!client)
@@ -1634,13 +1371,6 @@ lockdownd_error_t lockdownd_get_sync_data_classes(lockdownd_client_t client, cha
 }
 
 
-/**
- * Frees memory of an allocated array of data classes as returned by lockdownd_get_sync_data_classes()
- *
- * @param classes An array of class names to free.
- *
- * @return LOCKDOWN_E_SUCCESS on success
- */
 lockdownd_error_t lockdownd_data_classes_free(char **classes)
 {
 	if (classes) {
@@ -1653,13 +1383,6 @@ lockdownd_error_t lockdownd_data_classes_free(char **classes)
 	return LOCKDOWN_E_SUCCESS;
 }
 
-/**
- * Frees memory of a service descriptor as returned by lockdownd_start_service()
- *
- * @param sevice A service descriptor instance to free.
- *
- * @return LOCKDOWN_E_SUCCESS on success
- */
 lockdownd_error_t lockdownd_service_descriptor_free(lockdownd_service_descriptor_t service)
 {
 	if (service)
diff --git a/src/misagent.c b/src/misagent.c
index 6edbadd..96dddba 100644
--- a/src/misagent.c
+++ b/src/misagent.c
@@ -87,17 +87,6 @@ static misagent_error_t misagent_check_result(plist_t response, int* status_code
 	}
 }
 
-/**
- * Connects to the misagent service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will point to a newly allocated
- *     misagent_client_t upon successful return.
- *
- * @return MISAGENT_E_SUCCESS on success, MISAGENT_E_INVALID_ARG when
- *     client is NULL, or an MISAGENT_E_* error code otherwise.
- */
 misagent_error_t misagent_client_new(idevice_t device, lockdownd_service_descriptor_t service, misagent_client_t *client)
 {
 	property_list_service_client_t plistclient = NULL;
@@ -114,19 +103,6 @@ misagent_error_t misagent_client_new(idevice_t device, lockdownd_service_descrip
 	return MISAGENT_E_SUCCESS;
 }
 
-/**
- * Starts a new misagent service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     misagent_client_t upon successful return. Must be freed using
- *     misagent_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return MISAGENT_E_SUCCESS on success, or an MISAGENT_E_* error
- *     code otherwise.
- */
 misagent_error_t misagent_client_start_service(idevice_t device, misagent_client_t * client, const char* label)
 {
 	misagent_error_t err = MISAGENT_E_UNKNOWN_ERROR;
@@ -134,15 +110,6 @@ misagent_error_t misagent_client_start_service(idevice_t device, misagent_client
 	return err;
 }
 
-/**
- * Disconnects an misagent client from the device and frees up the
- * misagent client data.
- *
- * @param client The misagent client to disconnect and free.
- *
- * @return MISAGENT_E_SUCCESS on success, MISAGENT_E_INVALID_ARG when
- *     client is NULL, or an MISAGENT_E_* error code otherwise.
- */
 misagent_error_t misagent_client_free(misagent_client_t client)
 {
 	if (!client)
@@ -158,16 +125,6 @@ misagent_error_t misagent_client_free(misagent_client_t client)
 	return err;
 }
 
-/**
- * Installs the given provisioning profile. Only works with valid profiles.
- *
- * @param client The connected misagent to use for installation
- * @param profile The valid provisioning profile to install. This has to be
- *    passed as a PLIST_DATA, otherwise the function will fail.
- *
- * @return MISAGENT_E_SUCCESS on success, MISAGENT_E_INVALID_ARG when
- *     client is invalid, or an MISAGENT_E_* error code otherwise.
- */
 misagent_error_t misagent_install(misagent_client_t client, plist_t profile)
 {
 	if (!client || !client->parent || !profile || (plist_get_node_type(profile) != PLIST_DATA))
@@ -205,20 +162,6 @@ misagent_error_t misagent_install(misagent_client_t client, plist_t profile)
 	return res;
 }
 
-/**
- * Retrieves an array of all installed provisioning profiles.
- *
- * @param client The connected misagent to use.
- * @param profiles Pointer to a plist_t that will be set to a PLIST_ARRAY
- *    if the function is successful.
- *
- * @return MISAGENT_E_SUCCESS on success, MISAGENT_E_INVALID_ARG when
- *     client is invalid, or an MISAGENT_E_* error code otherwise.
- *
- * @note If no provisioning profiles are installed on the device, this function
- *     still returns MISAGENT_E_SUCCESS and profiles will just point to an
- *     empty array.
- */
 misagent_error_t misagent_copy(misagent_client_t client, plist_t* profiles)
 {
 	if (!client || !client->parent || !profiles)
@@ -259,17 +202,6 @@ misagent_error_t misagent_copy(misagent_client_t client, plist_t* profiles)
 
 }
 
-/**
- * Removes a given provisioning profile.
- *
- * @param client The connected misagent to use.
- * @param profileID Identifier of the provisioning profile to remove.
- *    This is a UUID that can be obtained from the provisioning profile data.
- * @see misagent_copy
- *
- * @return MISAGENT_E_SUCCESS on success, MISAGENT_E_INVALID_ARG when
- *     client is invalid, or an MISAGENT_E_* error code otherwise.
- */
 misagent_error_t misagent_remove(misagent_client_t client, const char* profileID)
 {
 	if (!client || !client->parent || !profileID)
@@ -307,13 +239,6 @@ misagent_error_t misagent_remove(misagent_client_t client, const char* profileID
 	return res;
 }
 
-/**
- * Retrieves the status code from the last operation.
- *
- * @param client The misagent to use.
- *
- * @return -1 if client is invalid, or the status code from the last operation
- */
 int misagent_get_status_code(misagent_client_t client)
 {
 	if (!client) {
diff --git a/src/mobile_image_mounter.c b/src/mobile_image_mounter.c
index 4b2818d..7133b8b 100644
--- a/src/mobile_image_mounter.c
+++ b/src/mobile_image_mounter.c
@@ -75,19 +75,6 @@ static mobile_image_mounter_error_t mobile_image_mounter_error(property_list_ser
 	return MOBILE_IMAGE_MOUNTER_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the mobile_image_mounter service on the specified device.
- * 
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will be set to a newly allocated
- *    mobile_image_mounter_client_t upon successful return.
- * 
- * @return MOBILE_IMAGE_MOUNTER_E_SUCCESS on success,
- *    MOBILE_IMAGE_MOUNTER_E_INVALID_ARG if device is NULL,
- *    or MOBILE_IMAGE_MOUNTER_E_CONN_FAILED if the connection to the
- *    device could not be established.
- */
 mobile_image_mounter_error_t mobile_image_mounter_new(idevice_t device, lockdownd_service_descriptor_t service, mobile_image_mounter_client_t *client)
 {
 	property_list_service_client_t plistclient = NULL;
@@ -105,19 +92,6 @@ mobile_image_mounter_error_t mobile_image_mounter_new(idevice_t device, lockdown
 	return MOBILE_IMAGE_MOUNTER_E_SUCCESS;
 }
 
-/**
- * Starts a new mobile_image_mounter service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     mobile_image_mounter_t upon successful return. Must be freed using
- *     mobile_image_mounter_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return MOBILE_IMAGE_MOUNTER_E_SUCCESS on success, or an MOBILE_IMAGE_MOUNTER_E_* error
- *     code otherwise.
- */
 mobile_image_mounter_error_t mobile_image_mounter_start_service(idevice_t device, mobile_image_mounter_client_t * client, const char* label)
 {
 	mobile_image_mounter_error_t err = MOBILE_IMAGE_MOUNTER_E_UNKNOWN_ERROR;
@@ -125,15 +99,6 @@ mobile_image_mounter_error_t mobile_image_mounter_start_service(idevice_t device
 	return err;
 }
 
-/**
- * Disconnects a mobile_image_mounter client from the device and frees up the
- * mobile_image_mounter client data.
- * 
- * @param client The mobile_image_mounter client to disconnect and free.
- *
- * @return MOBILE_IMAGE_MOUNTER_E_SUCCESS on success,
- *    or MOBILE_IMAGE_MOUNTER_E_INVALID_ARG if client is NULL.
- */
 mobile_image_mounter_error_t mobile_image_mounter_free(mobile_image_mounter_client_t client)
 {
 	if (!client)
@@ -147,19 +112,6 @@ mobile_image_mounter_error_t mobile_image_mounter_free(mobile_image_mounter_clie
 	return MOBILE_IMAGE_MOUNTER_E_SUCCESS;
 }
 
-/**
- * Tells if the image of ImageType is already mounted.
- *
- * @param client The client use
- * @param image_type The type of the image to look up
- * @param result Pointer to a plist that will receive the result of the
- *    operation.
- *
- * @note This function may return MOBILE_IMAGE_MOUNTER_E_SUCCESS even if the
- *    operation has failed. Check the resulting plist for further information.
- *
- * @return MOBILE_IMAGE_MOUNTER_E_SUCCESS on success, or an error code on error
- */
 mobile_image_mounter_error_t mobile_image_mounter_lookup_image(mobile_image_mounter_client_t client, const char *image_type, plist_t *result)
 {
 	if (!client || !image_type || !result) {
@@ -189,19 +141,6 @@ leave_unlock:
 	return res;
 }
 
-/**
- * Uploads an image to the device.
- *
- * @param client The connected mobile_image_mounter client.
- * @param image_type Type of image that is being uploaded.
- * @param image_size Total size of the image.
- * @param upload_cb Callback function that gets the data chunks for uploading
- *    the image.
- * @param userdata User defined data for the upload callback function.
- *
- * @return MOBILE_IMAGE_MOUNTER_E_SUCCESS on succes, or a
- *    MOBILE_IMAGE_MOUNTER_E_* error code otherwise.
- */
 mobile_image_mounter_error_t mobile_image_mounter_upload_image(mobile_image_mounter_client_t client, const char *image_type, size_t image_size, mobile_image_mounter_upload_cb_t upload_cb, void* userdata)
 {
 	if (!client || !image_type || (image_size == 0) || !upload_cb) {
@@ -311,27 +250,6 @@ leave_unlock:
 
 }
 
-/**
- * Mounts an image on the device.
- *
- * @param client The connected mobile_image_mounter client.
- * @param image_path The absolute path of the image to mount. The image must
- *    be present before calling this function.
- * @param image_signature Pointer to a buffer holding the images' signature
- * @param signature_length Length of the signature image_signature points to
- * @param image_type Type of image to mount
- * @param result Pointer to a plist that will receive the result of the
- *    operation.
- *
- * @note This function may return MOBILE_IMAGE_MOUNTER_E_SUCCESS even if the
- *    operation has failed. Check the resulting plist for further information.
- *    Note that there is no unmounting function. The mount persists until the
- *    device is rebooted.
- *
- * @return MOBILE_IMAGE_MOUNTER_E_SUCCESS on success,
- *    MOBILE_IMAGE_MOUNTER_E_INVALID_ARG if on ore more parameters are
- *    invalid, or another error code otherwise.
- */
 mobile_image_mounter_error_t mobile_image_mounter_mount_image(mobile_image_mounter_client_t client, const char *image_path, const char *image_signature, uint16_t signature_length, const char *image_type, plist_t *result)
 {
 	if (!client || !image_path || !image_signature || (signature_length == 0) || !image_type || !result) {
@@ -363,17 +281,6 @@ leave_unlock:
 	return res;
 }
 
-/**
- * Hangs up the connection to the mobile_image_mounter service.
- * This functions has to be called before freeing up a mobile_image_mounter
- * instance. If not, errors appear in the device's syslog.
- *
- * @param client The client to hang up
- *
- * @return MOBILE_IMAGE_MOUNTER_E_SUCCESS on success,
- *     MOBILE_IMAGE_MOUNTER_E_INVALID_ARG if client is invalid,
- *     or another error code otherwise.
- */
 mobile_image_mounter_error_t mobile_image_mounter_hangup(mobile_image_mounter_client_t client)
 {
 	if (!client) {
diff --git a/src/mobilebackup.c b/src/mobilebackup.c
index 66e590a..7107d12 100644
--- a/src/mobilebackup.c
+++ b/src/mobilebackup.c
@@ -60,18 +60,6 @@ static mobilebackup_error_t mobilebackup_error(device_link_service_error_t err)
 	return MOBILEBACKUP_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the mobilebackup service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will be set to a newly allocated
- *     mobilebackup_client_t upon successful return.
- *
- * @return MOBILEBACKUP_E_SUCCESS on success, MOBILEBACKUP_E_INVALID ARG if one
- *     or more parameters are invalid, or DEVICE_LINK_SERVICE_E_BAD_VERSION if
- *     the mobilebackup version on the device is newer.
- */
 mobilebackup_error_t mobilebackup_client_new(idevice_t device, lockdownd_service_descriptor_t service, mobilebackup_client_t * client)
 {
 	if (!device || !service || service->port == 0 || !client || *client)
@@ -99,19 +87,6 @@ mobilebackup_error_t mobilebackup_client_new(idevice_t device, lockdownd_service
 	return ret;
 }
 
-/**
- * Starts a new mobilebackup service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     mobilebackup_client_t upon successful return. Must be freed using
- *     mobilebackup_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return MOBILEBACKUP_E_SUCCESS on success, or an MOBILEBACKUP_E_* error
- *     code otherwise.
- */
 mobilebackup_error_t mobilebackup_client_start_service(idevice_t device, mobilebackup_client_t * client, const char* label)
 {
 	mobilebackup_error_t err = MOBILEBACKUP_E_UNKNOWN_ERROR;
@@ -119,15 +94,6 @@ mobilebackup_error_t mobilebackup_client_start_service(idevice_t device, mobileb
 	return err;
 }
 
-/**
- * Disconnects a mobilebackup client from the device and frees up the
- * mobilebackup client data.
- *
- * @param client The mobilebackup client to disconnect and free.
- *
- * @return MOBILEBACKUP_E_SUCCESS on success, or MOBILEBACKUP_E_INVALID_ARG
- *     if client is NULL.
- */
 mobilebackup_error_t mobilebackup_client_free(mobilebackup_client_t client)
 {
 	if (!client)
@@ -141,14 +107,6 @@ mobilebackup_error_t mobilebackup_client_free(mobilebackup_client_t client)
 	return err;
 }
 
-/**
- * Polls the device for mobilebackup data.
- *
- * @param client The mobilebackup client
- * @param plist A pointer to the location where the plist should be stored
- *
- * @return an error code
- */
 mobilebackup_error_t mobilebackup_receive(mobilebackup_client_t client, plist_t * plist)
 {
 	if (!client)
@@ -157,17 +115,6 @@ mobilebackup_error_t mobilebackup_receive(mobilebackup_client_t client, plist_t
 	return ret;
 }
 
-/**
- * Sends mobilebackup data to the device
- * 
- * @note This function is low-level and should only be used if you need to send
- *        a new type of message.
- *
- * @param client The mobilebackup client
- * @param plist The location of the plist to send
- *
- * @return an error code
- */
 mobilebackup_error_t mobilebackup_send(mobilebackup_client_t client, plist_t plist)
 {
 	if (!client || !plist)
@@ -285,23 +232,6 @@ leave:
 	return err;
 }
 
-/**
- * Request a backup from the connected device.
- *
- * @param client The connected MobileBackup client to use.
- * @param backup_manifest The backup manifest, a plist_t of type PLIST_DICT
- *    containing the backup state of the last backup. For a first-time backup
- *    set this parameter to NULL.
- * @param base_path The base path on the device to use for the backup
- *    operation, usually "/".
- * @param proto_version A string denoting the version of the backup protocol
- *    to use. Latest known version is "1.6"
- *
- * @return MOBILEBACKUP_E_SUCCESS on success, MOBILEBACKUP_E_INVALID_ARG if
- *    one of the parameters is invalid, MOBILEBACKUP_E_PLIST_ERROR if
- *    backup_manifest is not of type PLIST_DICT, MOBILEBACKUP_E_MUX_ERROR
- *    if a communication error occurs, MOBILEBACKUP_E_REPLY_NOT_OK
- */
 mobilebackup_error_t mobilebackup_request_backup(mobilebackup_client_t client, plist_t backup_manifest, const char *base_path, const char *proto_version)
 {
 	if (!client || !client->parent || !base_path || !proto_version)
@@ -362,41 +292,11 @@ leave:
 	return err;
 }
 
-/**
- * Sends a confirmation to the device that a backup file has been received.
- *
- * @param client The connected MobileBackup client to use.
- * 
- * @return MOBILEBACKUP_E_SUCCESS on success, MOBILEBACKUP_E_INVALID_ARG if
- *    client is invalid, or MOBILEBACKUP_E_MUX_ERROR if a communication error
- *    occurs.
- */
 mobilebackup_error_t mobilebackup_send_backup_file_received(mobilebackup_client_t client)
 {
 	return mobilebackup_send_message(client, "kBackupMessageBackupFileReceived", NULL);
 }
 
-/**
- * Request that a backup should be restored to the connected device.
- *
- * @param client The connected MobileBackup client to use.
- * @param backup_manifest The backup manifest, a plist_t of type PLIST_DICT
- *    containing the backup state to be restored.
- * @param flags Flags to send with the request. Currently this is a combination
- *    of the following mobilebackup_flags_t:
- *    MB_RESTORE_NOTIFY_SPRINGBOARD - let SpringBoard show a 'Restore' screen
- *    MB_RESTORE_PRESERVE_SETTINGS - do not overwrite any settings
- *    MB_RESTORE_PRESERVE_CAMERA_ROLL - preserve the photos of the camera roll
- * @param proto_version A string denoting the version of the backup protocol
- *    to use. Latest known version is "1.6". Ideally this value should be
- *    extracted from the given manifest plist.
- *
- * @return MOBILEBACKUP_E_SUCCESS on success, MOBILEBACKUP_E_INVALID_ARG if
- *    one of the parameters is invalid, MOBILEBACKUP_E_PLIST_ERROR if
- *    backup_manifest is not of type PLIST_DICT, MOBILEBACKUP_E_MUX_ERROR
- *    if a communication error occurs, or MOBILEBACKUP_E_REPLY_NOT_OK
- *    if the device did not accept the request.
- */
 mobilebackup_error_t mobilebackup_request_restore(mobilebackup_client_t client, plist_t backup_manifest, mobilebackup_flags_t flags, const char *proto_version)
 {
 	if (!client || !client->parent || !backup_manifest || !proto_version)
@@ -451,63 +351,16 @@ leave:
 	return err;
 }
 
-/**
- * Receive a confirmation from the device that it successfully received
- * a restore file.
- *
- * @param client The connected MobileBackup client to use.
- * @param result Pointer to a plist_t that will be set to the received plist
- *    for further processing. The caller has to free it using plist_free().
- *    Note that it will be set to NULL if the operation itself fails due to
- *    a communication or plist error.
- *    If this parameter is NULL, it will be ignored. 
- *
- * @return MOBILEBACKUP_E_SUCCESS on success, MOBILEBACKUP_E_INVALID_ARG if
- *    client is invalid, MOBILEBACKUP_E_REPLY_NOT_OK if the expected
- *    'BackupMessageRestoreFileReceived' message could not be received,
- *    MOBILEBACKUP_E_PLIST_ERROR if the received message is not a valid backup
- *    message plist, or MOBILEBACKUP_E_MUX_ERROR if a communication error
- *    occurs.
- */
 mobilebackup_error_t mobilebackup_receive_restore_file_received(mobilebackup_client_t client, plist_t *result)
 {
 	return mobilebackup_receive_message(client, "BackupMessageRestoreFileReceived", result);
 }
 
-/**
- * Receive a confirmation from the device that it successfully received
- * application data file.
- *
- * @param client The connected MobileBackup client to use.
- * @param result Pointer to a plist_t that will be set to the received plist
- *    for further processing. The caller has to free it using plist_free().
- *    Note that it will be set to NULL if the operation itself fails due to
- *    a communication or plist error.
- *    If this parameter is NULL, it will be ignored. 
- *
- * @return MOBILEBACKUP_E_SUCCESS on success, MOBILEBACKUP_E_INVALID_ARG if
- *    client is invalid, MOBILEBACKUP_E_REPLY_NOT_OK if the expected
- *    'BackupMessageRestoreApplicationReceived' message could not be received,
- *    MOBILEBACKUP_E_PLIST_ERROR if the received message is not a valid backup
- *    message plist, or MOBILEBACKUP_E_MUX_ERROR if a communication error
- *    occurs.
- */
 mobilebackup_error_t mobilebackup_receive_restore_application_received(mobilebackup_client_t client, plist_t *result)
 {
 	return mobilebackup_receive_message(client, "BackupMessageRestoreApplicationReceived", result);
 }
 
-/**
- * Tells the device that the restore process is complete and waits for the
- * device to close the connection. After that, the device should reboot.
- *
- * @param client The connected MobileBackup client to use.
- * 
- * @return MOBILEBACKUP_E_SUCCESS on success, MOBILEBACKUP_E_INVALID_ARG if
- *    client is invalid, MOBILEBACKUP_E_PLIST_ERROR if the received disconnect
- *    message plist is invalid, or MOBILEBACKUP_E_MUX_ERROR if a communication
- *    error occurs.
- */
 mobilebackup_error_t mobilebackup_send_restore_complete(mobilebackup_client_t client)
 {
 	mobilebackup_error_t err = mobilebackup_send_message(client, "BackupMessageRestoreComplete", NULL);
@@ -553,16 +406,6 @@ mobilebackup_error_t mobilebackup_send_restore_complete(mobilebackup_client_t cl
 	return err;
 }
 
-/**
- * Sends a backup error message to the device.
- *
- * @param client The connected MobileBackup client to use.
- * @param reason A string describing the reason for the error message.
- * 
- * @return MOBILEBACKUP_E_SUCCESS on success, MOBILEBACKUP_E_INVALID_ARG if
- *    one of the parameters is invalid, or MOBILEBACKUP_E_MUX_ERROR if a
- *    communication error occurs.
- */
 mobilebackup_error_t mobilebackup_send_error(mobilebackup_client_t client, const char *reason)
 {
 	if (!client || !client->parent || !reason)
diff --git a/src/mobilebackup2.c b/src/mobilebackup2.c
index 09b156d..41fe5d3 100644
--- a/src/mobilebackup2.c
+++ b/src/mobilebackup2.c
@@ -61,18 +61,6 @@ static mobilebackup2_error_t mobilebackup2_error(device_link_service_error_t err
 	return MOBILEBACKUP2_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the mobilebackup2 service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will be set to a newly allocated
- *     mobilebackup2_client_t upon successful return.
- *
- * @return MOBILEBACKUP2_E_SUCCESS on success, MOBILEBACKUP2_E_INVALID ARG
- *     if one or more parameter is invalid, or MOBILEBACKUP2_E_BAD_VERSION
- *     if the mobilebackup2 version on the device is newer.
- */
 mobilebackup2_error_t mobilebackup2_client_new(idevice_t device, lockdownd_service_descriptor_t service,
 						mobilebackup2_client_t * client)
 {
@@ -101,19 +89,6 @@ mobilebackup2_error_t mobilebackup2_client_new(idevice_t device, lockdownd_servi
 	return ret;
 }
 
-/**
- * Starts a new mobilebackup2 service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     mobilebackup2_client_t upon successful return. Must be freed using
- *     mobilebackup2_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return MOBILEBACKUP2_E_SUCCESS on success, or an MOBILEBACKUP2_E_* error
- *     code otherwise.
- */
 mobilebackup2_error_t mobilebackup2_client_start_service(idevice_t device, mobilebackup2_client_t * client, const char* label)
 {
 	mobilebackup2_error_t err = MOBILEBACKUP2_E_UNKNOWN_ERROR;
@@ -121,15 +96,6 @@ mobilebackup2_error_t mobilebackup2_client_start_service(idevice_t device, mobil
 	return err;
 }
 
-/**
- * Disconnects a mobilebackup2 client from the device and frees up the
- * mobilebackup2 client data.
- *
- * @param client The mobilebackup2 client to disconnect and free.
- *
- * @return MOBILEBACKUP2_E_SUCCESS on success, or MOBILEBACKUP2_E_INVALID_ARG
- *     if client is NULL.
- */
 mobilebackup2_error_t mobilebackup2_client_free(mobilebackup2_client_t client)
 {
 	if (!client)
@@ -143,18 +109,6 @@ mobilebackup2_error_t mobilebackup2_client_free(mobilebackup2_client_t client)
 	return err;
 }
 
-/**
- * Sends a backup message plist.
- *
- * @param client The connected MobileBackup client to use.
- * @param message The message to send. This will be inserted into the request
- *     plist as value for MessageName. If this parameter is NULL,
- *     the plist passed in the options parameter will be sent directly.
- * @param options Additional options as PLIST_DICT to add to the request.
- *     The MessageName key with the value passed in the message parameter
- *     will be inserted into this plist before sending it. This parameter
- *     can be NULL if message is not NULL.
- */
 mobilebackup2_error_t mobilebackup2_send_message(mobilebackup2_client_t client, const char *message, plist_t options)
 {
 	if (!client || !client->parent || (!message && !options))
@@ -253,45 +207,11 @@ leave:
 	return err;
 }
 
-/**
- * Receives a DL* message plist from the device.
- * This function is a wrapper around device_link_service_receive_message.
- *
- * @param client The connected MobileBackup client to use.
- * @param msg_plist Pointer to a plist that will be set to the contents of the
- *    message plist upon successful return.
- * @param dlmessage A pointer that will be set to a newly allocated char*
- *     containing the DL* string from the given plist. It is up to the caller
- *     to free the allocated memory. If this parameter is NULL
- *     it will be ignored.
- *
- * @return MOBILEBACKUP2_E_SUCCESS if a DL* message was received,
- *    MOBILEBACKUP2_E_INVALID_ARG if client or message is invalid,
- *    MOBILEBACKUP2_E_PLIST_ERROR if the received plist is invalid
- *    or is not a DL* message plist, or MOBILEBACKUP2_E_MUX_ERROR if
- *    receiving from the device failed.
- */
 mobilebackup2_error_t mobilebackup2_receive_message(mobilebackup2_client_t client, plist_t *msg_plist, char **dlmessage)
 {
 	return mobilebackup2_error(device_link_service_receive_message(client->parent, msg_plist, dlmessage));
 }
 
-/**
- * Send binary data to the device.
- *
- * @note This function returns MOBILEBACKUP2_E_SUCCESS even if less than the
- *     requested length has been sent. The fourth parameter is required and
- *     must be checked to ensure if the whole data has been sent.
- *
- * @param client The MobileBackup client to send to.
- * @param data Pointer to the data to send
- * @param length Number of bytes to send
- * @param bytes Number of bytes actually sent
- *
- * @return MOBILEBACKUP2_E_SUCCESS if any data was successfully sent,
- *     MOBILEBACKUP2_E_INVALID_ARG if one of the parameters is invalid,
- *     or MOBILEBACKUP2_E_MUX_ERROR if sending of the data failed.
- */
 mobilebackup2_error_t mobilebackup2_send_raw(mobilebackup2_client_t client, const char *data, uint32_t length, uint32_t *bytes)
 {
 	if (!client || !client->parent || !data || (length == 0) || !bytes)
@@ -318,24 +238,6 @@ mobilebackup2_error_t mobilebackup2_send_raw(mobilebackup2_client_t client, cons
 	}
 }
 
-/**
- * Receive binary from the device.
- *
- * @note This function returns MOBILEBACKUP2_E_SUCCESS even if no data
- *     has been received (unless a communication error occured).
- *     The fourth parameter is required and must be checked to know how
- *     many bytes were actually received.
- *
- * @param client The MobileBackup client to receive from.
- * @param data Pointer to a buffer that will be filled with the received data.
- * @param length Number of bytes to receive. The data buffer needs to be large
- *     enough to store this amount of data.
- * @paran bytes Number of bytes actually received.
- *
- * @return MOBILEBACKUP2_E_SUCCESS if any or no data was received,
- *     MOBILEBACKUP2_E_INVALID_ARG if one of the parameters is invalid,
- *     or MOBILEBACKUP2_E_MUX_ERROR if receiving the data failed.
- */
 mobilebackup2_error_t mobilebackup2_receive_raw(mobilebackup2_client_t client, char *data, uint32_t length, uint32_t *bytes)
 {
 	if (!client || !client->parent || !data || (length == 0) || !bytes)
@@ -363,17 +265,6 @@ mobilebackup2_error_t mobilebackup2_receive_raw(mobilebackup2_client_t client, c
 	}
 }
 
-/**
- * Performs the mobilebackup2 protocol version exchange.
- * 
- * @param client The MobileBackup client to use.
- * @param local_versions An array of supported versions to send to the remote.
- * @param count The number of items in local_versions.
- * @param remote_version Holds the protocol version of the remote on success.
- * 
- * @return MOBILEBACKUP2_E_SUCCESS on success, or a MOBILEBACKUP2_E_* error
- *     code otherwise.
- */
 mobilebackup2_error_t mobilebackup2_version_exchange(mobilebackup2_client_t client, double local_versions[], char count, double *remote_version)
 {
 	int i;
@@ -432,19 +323,6 @@ leave:
 	return err;
 }
 
-/**
- * Send a request to the connected mobilebackup2 service.
- *
- * @param client
- * @param request The request to send to the backup service.
- *     Currently, this is one of "Backup", "Restore", "Info", or "List".
- * @param target_identifier UDID of the target device.
- * @param source_identifier UDID of backup data?
- * @param options Additional options in a plist of type PLIST_DICT.
- *
- * @return MOBILEBACKUP2_E_SUCCESS if the request was successfully sent,
- *     or a MOBILEBACKUP2_E_* error value otherwise.
- */
 mobilebackup2_error_t mobilebackup2_send_request(mobilebackup2_client_t client, const char *request, const char *target_identifier, const char *source_identifier, plist_t options)
 {
 	if (!client || !client->parent || !request || !target_identifier)
@@ -476,18 +354,6 @@ mobilebackup2_error_t mobilebackup2_send_request(mobilebackup2_client_t client,
 	return err;
 }
 
-/**
- * Sends a DLMessageStatusResponse to the device.
- * 
- * @param client The MobileBackup client to use.
- * @param status_code The status code to send.
- * @param status1 A status message to send. Can be NULL if not required.
- * @param status2 An additional status plist to attach to the response.
- *     Can be NULL if not required.
- *
- * @return MOBILEBACKUP2_E_SUCCESS on success, MOBILEBACKUP2_E_INVALID_ARG
- *     if client is invalid, or another MOBILEBACKUP2_E_* otherwise.
- */
 mobilebackup2_error_t mobilebackup2_send_status_response(mobilebackup2_client_t client, int status_code, const char *status1, plist_t status2)
 {
 	if (!client || !client->parent)
diff --git a/src/mobilesync.c b/src/mobilesync.c
index fd64e63..f0fc4b2 100644
--- a/src/mobilesync.c
+++ b/src/mobilesync.c
@@ -65,19 +65,6 @@ static mobilesync_error_t mobilesync_error(device_link_service_error_t err)
 	return MOBILESYNC_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the mobilesync service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will be set to a newly allocated
- *     #mobilesync_client_t upon successful return.
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one or more parameters are invalid
- * @retval DEVICE_LINK_SERVICE_E_BAD_VERSION if the mobilesync version on
- * the device is newer.
- */
 mobilesync_error_t mobilesync_client_new(idevice_t device, lockdownd_service_descriptor_t service,
 						   mobilesync_client_t * client)
 {
@@ -108,19 +95,6 @@ mobilesync_error_t mobilesync_client_new(idevice_t device, lockdownd_service_des
 	return ret;
 }
 
-/**
- * Starts a new mobilesync service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     mobilesync_client_t upon successful return. Must be freed using
- *     mobilesync_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return MOBILESYNC_E_SUCCESS on success, or an MOBILESYNC_E_* error
- *     code otherwise.
- */
 mobilesync_error_t mobilesync_client_start_service(idevice_t device, mobilesync_client_t * client, const char* label)
 {
 	mobilesync_error_t err = MOBILESYNC_E_UNKNOWN_ERROR;
@@ -128,15 +102,6 @@ mobilesync_error_t mobilesync_client_start_service(idevice_t device, mobilesync_
 	return err;
 }
 
-/**
- * Disconnects a mobilesync client from the device and frees up the
- * mobilesync client data.
- *
- * @param client The mobilesync client to disconnect and free.
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if \a client is NULL.
- */
 mobilesync_error_t mobilesync_client_free(mobilesync_client_t client)
 {
 	if (!client)
@@ -147,14 +112,6 @@ mobilesync_error_t mobilesync_client_free(mobilesync_client_t client)
 	return err;
 }
 
-/**
- * Polls the device for mobilesync data.
- *
- * @param client The mobilesync client
- * @param plist A pointer to the location where the plist should be stored
- *
- * @return an error code
- */
 mobilesync_error_t mobilesync_receive(mobilesync_client_t client, plist_t * plist)
 {
 	if (!client)
@@ -163,17 +120,6 @@ mobilesync_error_t mobilesync_receive(mobilesync_client_t client, plist_t * plis
 	return ret;
 }
 
-/**
- * Sends mobilesync data to the device
- * 
- * @note This function is low-level and should only be used if you need to send
- *        a new type of message.
- *
- * @param client The mobilesync client
- * @param plist The location of the plist to send
- *
- * @return an error code
- */
 mobilesync_error_t mobilesync_send(mobilesync_client_t client, plist_t plist)
 {
 	if (!client || !plist)
@@ -181,26 +127,6 @@ mobilesync_error_t mobilesync_send(mobilesync_client_t client, plist_t plist)
 	return mobilesync_error(device_link_service_send(client->parent, plist));
 }
 
-/**
- * Requests starting synchronization of a data class with the device
- *
- * @param client The mobilesync client
- * @param data_class The data class identifier to sync
- * @param anchors The anchors required to exchange with the device. The anchors
- *   allow the device to tell if the synchronization information on the computer
- *   and device are consistent to determine what sync type is required.
- * @param computer_data_class_version The version of the data class storage on the computer
- * @param sync_type A pointer to store the sync type reported by the device_anchor
- * @param device_data_class_version The version of the data class storage on the device
- * @param error_description A pointer to store an error message if reported by the device
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one of the parameters is invalid
- * @retval MOBILESYNC_E_PLIST_ERROR if the received plist is not of valid form
- * @retval MOBILESYNC_E_SYNC_REFUSED if the device refused to sync
- * @retval MOBILESYNC_E_CANCELLED if the device explicitly cancelled the
- * sync request
- */
 mobilesync_error_t mobilesync_start(mobilesync_client_t client, const char *data_class, mobilesync_anchors_t anchors, uint64_t computer_data_class_version, mobilesync_sync_type_t *sync_type, uint64_t *device_data_class_version, char** error_description)
 {
 	if (!client || client->data_class || !data_class ||
@@ -327,17 +253,6 @@ mobilesync_error_t mobilesync_start(mobilesync_client_t client, const char *data
 	return err;
 }
 
-/**
- * Finish a synchronization session of a data class on the device.
- * A session must have previously been started using mobilesync_start().
- *
- * @param client The mobilesync client
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one of the parameters is invalid
- * @retval MOBILESYNC_E_PLIST_ERROR if the received plist is not of valid
- * form
- */
 mobilesync_error_t mobilesync_finish(mobilesync_client_t client)
 {
 	if (!client || !client->data_class) {
@@ -423,49 +338,16 @@ static mobilesync_error_t mobilesync_get_records(mobilesync_client_t client, con
 	return err;
 }
 
-/**
- * Requests to receive all records of the currently set data class from the device.
- * The actually changes are retrieved using mobilesync_receive_changes() after this
- * request has been successful.
- *
- * @param client The mobilesync client
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one of the parameters is invalid
- */
 mobilesync_error_t mobilesync_get_all_records_from_device(mobilesync_client_t client)
 {
 	return mobilesync_get_records(client, "SDMessageGetAllRecordsFromDevice");
 }
 
-/**
- * Requests to receive only changed records of the currently set data class from the device.
- * The actually changes are retrieved using mobilesync_receive_changes() after this
- * request has been successful.
- *
- * @param client The mobilesync client
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one of the parameters is invalid
- */
 mobilesync_error_t mobilesync_get_changes_from_device(mobilesync_client_t client)
 {
 	return mobilesync_get_records(client, "SDMessageGetChangesFromDevice");
 }
 
-/**
- * Receives changed entitites of the currently set data class from the device
- *
- * @param client The mobilesync client
- * @param entities A pointer to store the changed entity records as a PLIST_DICT
- * @param is_last_record A pointer to store a flag indicating if this submission is the last one
- * @param actions A pointer to additional flags the device is sending or NULL to ignore
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one of the parameters is invalid
- * @retval MOBILESYNC_E_CANCELLED if the device explicitly cancelled the
- * session
- */
 mobilesync_error_t mobilesync_receive_changes(mobilesync_client_t client, plist_t *entities, uint8_t *is_last_record, plist_t *actions)
 {
 	if (!client || !client->data_class) {
@@ -533,17 +415,6 @@ mobilesync_error_t mobilesync_receive_changes(mobilesync_client_t client, plist_
 	return err;
 }
 
-/**
- * Requests the device to delete all records of the current data class
- *
- * @note The operation must be called after starting synchronization.
- *
- * @param client The mobilesync client
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one of the parameters is invalid
- * @retval MOBILESYNC_E_PLIST_ERROR if the received plist is not of valid form
- */
 mobilesync_error_t mobilesync_clear_all_records_on_device(mobilesync_client_t client)
 {
 	if (!client || !client->data_class) {
@@ -613,14 +484,6 @@ mobilesync_error_t mobilesync_clear_all_records_on_device(mobilesync_client_t cl
 	return err;
 }
 
-/**
- * Acknowledges to the device that the changes have been merged on the computer
- *
- * @param client The mobilesync client
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one of the parameters is invalid
- */
 mobilesync_error_t mobilesync_acknowledge_changes_from_device(mobilesync_client_t client)
 {
 	if (!client || !client->data_class) {
@@ -655,23 +518,6 @@ static plist_t create_process_changes_message(const char *data_class, plist_t en
 	return msg;
 }
 
-/**
- * Verifies if the device is ready to receive changes from the computer.
- * This call changes the synchronization direction so that mobilesync_send_changes()
- * can be used to send changes to the device.
- *
- * @param client The mobilesync client
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one of the parameters is invalid
- * @retval MOBILESYNC_E_PLIST_ERROR if the received plist is not of valid form
- * @retval MOBILESYNC_E_WRONG_DIRECTION if the current sync direction does
- * not permit this call
- * @retval MOBILESYNC_E_CANCELLED if the device explicitly cancelled the
- * session
- * @retval MOBILESYNC_E_NOT_READY if the device is not ready to start
- * receiving any changes
- */
 mobilesync_error_t mobilesync_ready_to_send_changes_from_computer(mobilesync_client_t client)
 {
 	if (!client || !client->data_class) {
@@ -739,20 +585,6 @@ mobilesync_error_t mobilesync_ready_to_send_changes_from_computer(mobilesync_cli
 	return err;
 }
 
-/**
- * Sends changed entities of the currently set data class to the device
- *
- * @param client The mobilesync client
- * @param entities The changed entity records as a PLIST_DICT
- * @param is_last_record A flag indicating if this submission is the last one
- * @param actions Additional actions for the device created with mobilesync_actions_new()
- *    or NULL if no actions should be passed
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one of the parameters is invalid,
- * @retval MOBILESYNC_E_WRONG_DIRECTION if the current sync direction does
- * not permit this call
- */
 mobilesync_error_t mobilesync_send_changes(mobilesync_client_t client, plist_t entities, uint8_t is_last_record, plist_t actions)
 {
 	if (!client || !client->data_class || !entities) {
@@ -781,21 +613,6 @@ mobilesync_error_t mobilesync_send_changes(mobilesync_client_t client, plist_t e
 	return err;
 }
 
-/**
- * Receives any remapped identifiers reported after the device merged submitted changes.
- *
- * @param client The mobilesync client
- * @param mapping A pointer to an array plist containing a dict of identifier remappings
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one of the parameters is invalid
- * @retval MOBILESYNC_E_PLIST_ERROR if the received plist is not of valid
- * form
- * @retval MOBILESYNC_E_WRONG_DIRECTION if the current sync direction does
- * not permit this call
- * @retval MOBILESYNC_E_CANCELLED if the device explicitly cancelled the
- * session
- */
 mobilesync_error_t mobilesync_remap_identifiers(mobilesync_client_t client, plist_t *mapping)
 {
 	if (!client || !client->data_class) {
@@ -865,15 +682,6 @@ mobilesync_error_t mobilesync_remap_identifiers(mobilesync_client_t client, plis
 	return err;
 }
 
-/**
- * Cancels a running synchronization session with a device at any time.
- *
- * @param client The mobilesync client
- * @param reason The reason to supply to the device for cancelling
- *
- * @retval MOBILESYNC_E_SUCCESS on success
- * @retval MOBILESYNC_E_INVALID_ARG if one of the parameters is invalid
- */
 mobilesync_error_t mobilesync_cancel(mobilesync_client_t client, const char* reason)
 {
 	if (!client || !client->data_class || !reason) {
@@ -900,15 +708,6 @@ mobilesync_error_t mobilesync_cancel(mobilesync_client_t client, const char* rea
 	return err;
 }
 
-/**
- * Allocates memory for a new anchors struct initialized with the passed anchors.
- *
- * @param device_anchor An anchor the device reported the last time or NULL
- *   if none is known yet which for instance is true on first synchronization.
- * @param computer_anchor An arbitrary string to use as anchor for the computer.
- * 
- * @return A new #mobilesync_anchors_t struct. Must be freed using mobilesync_anchors_free().
- */
 mobilesync_anchors_t mobilesync_anchors_new(const char *device_anchor, const char *computer_anchor)
 {
 	mobilesync_anchors_t anchors = (mobilesync_anchors_t) malloc(sizeof(mobilesync_anchors)); 
@@ -926,11 +725,6 @@ mobilesync_anchors_t mobilesync_anchors_new(const char *device_anchor, const cha
 	return anchors;
 }
 
-/**
- * Free memory used by anchors.
- *
- * @param anchors The anchors to free.
- */
 void mobilesync_anchors_free(mobilesync_anchors_t anchors)
 {
 	if (anchors->device_anchor != NULL) {
@@ -945,28 +739,11 @@ void mobilesync_anchors_free(mobilesync_anchors_t anchors)
 	anchors = NULL;
 }
 
-/**
- * Create a new actions plist to use in mobilesync_send_changes().
- *
- * @return A new plist_t of type PLIST_DICT.
- */
 plist_t mobilesync_actions_new()
 {
 	return plist_new_dict();
 }
 
-/**
- * Add one or more new key:value pairs to the given actions plist.
- *
- * @param actions The actions to modify.
- * @param ... KEY, VALUE, [KEY, VALUE], NULL
- *
- * @note The known keys so far are "SyncDeviceLinkEntityNamesKey" which expects
- *       an array of entity names, followed by a count paramter as well as
- *       "SyncDeviceLinkAllRecordsOfPulledEntityTypeSentKey" which expects an
- *       integer to use as a boolean value indicating that the device should
- *       link submitted changes and report remapped identifiers.
- */
 void mobilesync_actions_add(plist_t actions, ...)
 {
 	if (!actions)
@@ -999,11 +776,6 @@ void mobilesync_actions_add(plist_t actions, ...)
 	va_end(args);
 }
 
-/**
- * Free actions plist.
- *
- * @param actions The actions plist to free. Does nothing if NULL is passed.
- */
 void mobilesync_actions_free(plist_t actions)
 {
 	if (actions) {
diff --git a/src/notification_proxy.c b/src/notification_proxy.c
index 1ccda6b..909ede4 100644
--- a/src/notification_proxy.c
+++ b/src/notification_proxy.c
@@ -86,18 +86,6 @@ static np_error_t np_error(property_list_service_error_t err)
 	return NP_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the notification_proxy on the specified device.
- * 
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will be set to a newly allocated np_client_t
- *    upon successful return.
- * 
- * @return NP_E_SUCCESS on success, NP_E_INVALID_ARG when device is NULL,
- *   or NP_E_CONN_FAILED when the connection to the device could not be
- *   established.
- */
 np_error_t np_client_new(idevice_t device, lockdownd_service_descriptor_t service, np_client_t *client)
 {
 	property_list_service_client_t plistclient = NULL;
@@ -116,19 +104,6 @@ np_error_t np_client_new(idevice_t device, lockdownd_service_descriptor_t servic
 	return NP_E_SUCCESS;
 }
 
-/**
- * Starts a new notification proxy service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     np_client_t upon successful return. Must be freed using
- *     np_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return NP_E_SUCCESS on success, or an NP_E_* error
- *     code otherwise.
- */
 np_error_t np_client_start_service(idevice_t device, np_client_t* client, const char* label)
 {
 	np_error_t err = NP_E_UNKNOWN_ERROR;
@@ -136,14 +111,6 @@ np_error_t np_client_start_service(idevice_t device, np_client_t* client, const
 	return err;
 }
 
-/**
- * Disconnects a notification_proxy client from the device and frees up the
- * notification_proxy client data.
- * 
- * @param client The notification_proxy client to disconnect and free.
- *
- * @return NP_E_SUCCESS on success, or NP_E_INVALID_ARG when client is NULL.
- */
 np_error_t np_client_free(np_client_t client)
 {
 	if (!client)
@@ -161,14 +128,6 @@ np_error_t np_client_free(np_client_t client)
 	return NP_E_SUCCESS;
 }
 
-/**
- * Sends a notification to the device's notification_proxy.
- *
- * @param client The client to send to
- * @param notification The notification message to send
- *
- * @return NP_E_SUCCESS on success, or an error returned by np_plist_send
- */
 np_error_t np_post_notification(np_client_t client, const char *notification)
 {
 	if (!client || !notification) {
@@ -220,15 +179,6 @@ np_error_t np_post_notification(np_client_t client, const char *notification)
 	return res;
 }
 
-/**
- * Tells the device to send a notification on the specified event.
- *
- * @param client The client to send to
- * @param notification The notifications that should be observed.
- *
- * @return NP_E_SUCCESS on success, NP_E_INVALID_ARG when client or
- *    notification are NULL, or an error returned by np_plist_send.
- */
 np_error_t np_observe_notification( np_client_t client, const char *notification )
 {
 	if (!client || !notification) {
@@ -250,17 +200,6 @@ np_error_t np_observe_notification( np_client_t client, const char *notification
 	return res;
 }
 
-/**
- * Tells the device to send a notification on specified events.
- *
- * @param client The client to send to
- * @param notification_spec Specification of the notifications that should be
- *  observed. This is expected to be an array of const char* that MUST have a
- *  terminating NULL entry.
- *
- * @return NP_E_SUCCESS on success, NP_E_INVALID_ARG when client is null,
- *   or an error returned by np_observe_notification.
- */
 np_error_t np_observe_notifications(np_client_t client, const char **notification_spec)
 {
 	int i = 0;
@@ -390,28 +329,6 @@ void* np_notifier( void* arg )
 	return NULL;
 }
 
-/**
- * This function allows an application to define a callback function that will
- * be called when a notification has been received.
- * It will start a thread that polls for notifications and calls the callback
- * function if a notification has been received.
- * In case of an error condition when polling for notifications - e.g. device
- * disconnect - the thread will call the callback function with an empty
- * notification "" and terminate itself.
- *
- * @param client the NP client
- * @param notify_cb pointer to a callback function or NULL to de-register a
- *        previously set callback function.
- * @param user_data Pointer that will be passed to the callback function as
- *        user data. If notify_cb is NULL, this parameter is ignored.
- *
- * @note Only one callback function can be registered at the same time;
- *       any previously set callback function will be removed automatically.
- *
- * @return NP_E_SUCCESS when the callback was successfully registered,
- *         NP_E_INVALID_ARG when client is NULL, or NP_E_UNKNOWN_ERROR when
- *         the callback thread could no be created.
- */
 np_error_t np_set_notify_callback( np_client_t client, np_notify_cb_t notify_cb, void *user_data )
 {
 	if (!client)
diff --git a/src/restore.c b/src/restore.c
index 6339270..2a025e8 100644
--- a/src/restore.c
+++ b/src/restore.c
@@ -89,14 +89,6 @@ static void plist_dict_add_label(plist_t plist, const char *label)
 	}
 }
 
-/**
- * Closes the restored client session if one is running and frees up the
- * restored_client struct.
- *
- * @param client The restore client
- *
- * @return RESTORE_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL
- */
 restored_error_t restored_client_free(restored_client_t client)
 {
 	if (!client)
@@ -127,13 +119,6 @@ restored_error_t restored_client_free(restored_client_t client)
 	return ret;
 }
 
-/**
- * Sets the label to send for requests to restored.
- *
- * @param client The restore client
- * @param label The label to set or NULL to disable sending a label
- *
- */
 void restored_client_set_label(restored_client_t client, const char *label)
 {
 	if (client) {
@@ -144,15 +129,6 @@ void restored_client_set_label(restored_client_t client, const char *label)
 	}
 }
 
-/**
- * Receives a plist from restored.
- *
- * @param client The restored client
- * @param plist The plist to store the received data
- *
- * @return RESTORE_E_SUCCESS on success, NP_E_INVALID_ARG when client or
- *  plist is NULL
- */
 restored_error_t restored_receive(restored_client_t client, plist_t *plist)
 {
 	if (!client || !plist || (plist && *plist))
@@ -172,18 +148,6 @@ restored_error_t restored_receive(restored_client_t client, plist_t *plist)
 	return ret;
 }
 
-/**
- * Sends a plist to restored.
- *
- * @note This function is low-level and should only be used if you need to send
- *        a new type of message.
- *
- * @param client The restored client
- * @param plist The plist to send
- *
- * @return RESTORE_E_SUCCESS on success, NP_E_INVALID_ARG when client or
- *  plist is NULL
- */
 restored_error_t restored_send(restored_client_t client, plist_t plist)
 {
 	if (!client || !plist)
@@ -199,16 +163,6 @@ restored_error_t restored_send(restored_client_t client, plist_t plist)
 	return ret;
 }
 
-/**
- * Query the type of the service daemon. Depending on whether the device is
- * queried in normal mode or restore mode, different types will be returned.
- *
- * @param client The restored client
- * @param type The type returned by the service daemon. Pass NULL to ignore.
- * @param version The restore protocol version. Pass NULL to ignore.
- *
- * @return RESTORE_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL
- */
 restored_error_t restored_query_type(restored_client_t client, char **type, uint64_t *version)
 {
 	if (!client)
@@ -268,15 +222,6 @@ restored_error_t restored_query_type(restored_client_t client, char **type, uint
 	return ret;
 }
 
-/**
- * Queries a value from the device specified by a key.
- *
- * @param client An initialized restored client.
- * @param key The key name to request
- * @param value A plist node representing the result value node
- *
- * @return RESTORE_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL, RESTORE_E_PLIST_ERROR if value for key can't be found
- */
 restored_error_t restored_query_value(restored_client_t client, const char *key, plist_t *value)
 {
 	if (!client || !key)
@@ -319,16 +264,7 @@ restored_error_t restored_query_value(restored_client_t client, const char *key,
 	return ret;
 }
 
-/**
- * Retrieves a value from information plist specified by a key.
- *
- * @param client An initialized restored client.
- * @param key The key name to request or NULL to query for all keys
- * @param value A plist node representing the result value node
- *
- * @return RESTORE_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL, RESTORE_E_PLIST_ERROR if value for key can't be found
- */
-restored_error_t restored_get_value(restored_client_t client, const char *key, plist_t *value) 
+restored_error_t restored_get_value(restored_client_t client, const char *key, plist_t *value)
 {
 	if (!client || !value || (value && *value))
 		return RESTORE_E_INVALID_ARG;
@@ -355,15 +291,6 @@ restored_error_t restored_get_value(restored_client_t client, const char *key, p
 	return ret;
 }
 
-/**
- * Creates a new restored client for the device.
- *
- * @param device The device to create a restored client for
- * @param client The pointer to the location of the new restored_client
- * @param label The label to use for communication. Usually the program name.
- *
- * @return RESTORE_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL
- */
 restored_error_t restored_client_new(idevice_t device, restored_client_t *client, const char *label)
 {
 	if (!client)
@@ -405,14 +332,6 @@ restored_error_t restored_client_new(idevice_t device, restored_client_t *client
 	return ret;
 }
 
-/**
- * Sends the Goodbye request to restored signaling the end of communication.
- *
- * @param client The restore client
- *
- * @return RESTORE_E_SUCCESS on success, NP_E_INVALID_ARG when client is NULL,
- *  RESTORE_E_PLIST_ERROR if the device did not acknowledge the request
- */
 restored_error_t restored_goodbye(restored_client_t client)
 {
 	if (!client)
@@ -445,16 +364,6 @@ restored_error_t restored_goodbye(restored_client_t client)
 	return ret;
 }
 
-/**
- * Requests to start a restore and retrieve it's port on success.
- *
- * @param client The restored client
- * @param options PLIST_DICT with options for the restore process or NULL
- * @param version the restore protocol version, see restored_query_type()
- *
- * @return RESTORE_E_SUCCESS on success, NP_E_INVALID_ARG if a parameter
- *  is NULL, RESTORE_E_START_RESTORE_FAILED if the request fails
- */
 restored_error_t restored_start_restore(restored_client_t client, plist_t options, uint64_t version)
 {
 	if (!client)
@@ -479,14 +388,6 @@ restored_error_t restored_start_restore(restored_client_t client, plist_t option
 	return ret;
 }
 
-/**
- * Requests device to reboot.
- *
- * @param client The restored client
- *
- * @return RESTORE_E_SUCCESS on success, NP_E_INVALID_ARG if a parameter
- *  is NULL
- */
 restored_error_t restored_reboot(restored_client_t client)
 {
 	if (!client)
diff --git a/src/sbservices.c b/src/sbservices.c
index 1d043f1..ea12e35 100644
--- a/src/sbservices.c
+++ b/src/sbservices.c
@@ -76,17 +76,6 @@ static sbservices_error_t sbservices_error(property_list_service_error_t err)
 	return SBSERVICES_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the springboardservices service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will point to a newly allocated
- *     sbservices_client_t upon successful return.
- *
- * @return SBSERVICES_E_SUCCESS on success, SBSERVICES_E_INVALID_ARG when
- *     client is NULL, or an SBSERVICES_E_* error code otherwise.
- */
 sbservices_error_t sbservices_client_new(idevice_t device, lockdownd_service_descriptor_t service, sbservices_client_t *client)
 {
 	property_list_service_client_t plistclient = NULL;
@@ -103,19 +92,6 @@ sbservices_error_t sbservices_client_new(idevice_t device, lockdownd_service_des
 	return SBSERVICES_E_SUCCESS;
 }
 
-/**
- * Starts a new sbservices service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     sbservices_client_t upon successful return. Must be freed using
- *     sbservices_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return SBSERVICES_E_SUCCESS on success, or an SBSERVICES_E_* error
- *     code otherwise.
- */
 sbservices_error_t sbservices_client_start_service(idevice_t device, sbservices_client_t * client, const char* label)
 {
 	sbservices_error_t err = SBSERVICES_E_UNKNOWN_ERROR;
@@ -123,15 +99,6 @@ sbservices_error_t sbservices_client_start_service(idevice_t device, sbservices_
 	return err;
 }
 
-/**
- * Disconnects an sbservices client from the device and frees up the
- * sbservices client data.
- *
- * @param client The sbservices client to disconnect and free.
- *
- * @return SBSERVICES_E_SUCCESS on success, SBSERVICES_E_INVALID_ARG when
- *     client is NULL, or an SBSERVICES_E_* error code otherwise.
- */
 sbservices_error_t sbservices_client_free(sbservices_client_t client)
 {
 	if (!client)
@@ -145,20 +112,6 @@ sbservices_error_t sbservices_client_free(sbservices_client_t client)
 	return err;
 }
 
-/**
- * Gets the icon state of the connected device.
- *
- * @param client The connected sbservices client to use.
- * @param state Pointer that will point to a newly allocated plist containing
- *     the current icon state. It is up to the caller to free the memory.
- * @param format_version A string to be passed as formatVersion along with
- *     the request, or NULL if no formatVersion should be passed. This is only
- *     supported since iOS 4.0 so for older firmware versions this must be set
- *     to NULL.
- *
- * @return SBSERVICES_E_SUCCESS on success, SBSERVICES_E_INVALID_ARG when
- *     client or state is invalid, or an SBSERVICES_E_* error code otherwise.
- */
 sbservices_error_t sbservices_get_icon_state(sbservices_client_t client, plist_t *state, const char *format_version)
 {
 	if (!client || !client->parent || !state)
@@ -199,15 +152,6 @@ leave_unlock:
 	return res;
 }
 
-/**
- * Sets the icon state of the connected device.
- *
- * @param client The connected sbservices client to use.
- * @param newstate A plist containing the new iconstate.
- *
- * @return SBSERVICES_E_SUCCESS on success, SBSERVICES_E_INVALID_ARG when
- *     client or newstate is NULL, or an SBSERVICES_E_* error code otherwise.
- */
 sbservices_error_t sbservices_set_icon_state(sbservices_client_t client, plist_t newstate)
 {
 	if (!client || !client->parent || !newstate)
@@ -234,21 +178,6 @@ sbservices_error_t sbservices_set_icon_state(sbservices_client_t client, plist_t
 	return res;
 }
 
-/**
- * Get the icon of the specified app as PNG data.
- *
- * @param client The connected sbservices client to use.
- * @param bundleId The bundle identifier of the app to retrieve the icon for.
- * @param pngdata Pointer that will point to a newly allocated buffer
- *     containing the PNG data upon successful return. It is up to the caller
- *     to free the memory.
- * @param pngsize Pointer to a uint64_t that will be set to the size of the
- *     buffer pngdata points to upon successful return.
- *
- * @return SBSERVICES_E_SUCCESS on success, SBSERVICES_E_INVALID_ARG when
- *     client, bundleId, or pngdata are invalid, or an SBSERVICES_E_* error
- *     code otherwise.
- */
 sbservices_error_t sbservices_get_icon_pngdata(sbservices_client_t client, const char *bundleId, char **pngdata, uint64_t *pngsize)
 {
 	if (!client || !client->parent || !bundleId || !pngdata)
@@ -286,15 +215,6 @@ leave_unlock:
 	return res;
 }
 
-/**
- * Gets the interface orientation of the device.
- *
- * @param client The connected sbservices client to use.
- * @param interface_orientation The interface orientation upon successful return.
- *
- * @return SBSERVICES_E_SUCCESS on success, SBSERVICES_E_INVALID_ARG when
- *     client or state is invalid, or an SBSERVICES_E_* error code otherwise.
- */
 sbservices_error_t sbservices_get_interface_orientation(sbservices_client_t client, sbservices_interface_orientation_t* interface_orientation)
 {
 	if (!client || !client->parent || !interface_orientation)
@@ -333,20 +253,6 @@ leave_unlock:
 	return res;
 }
 
-/**
- * Get the home screen wallpaper as PNG data.
- *
- * @param client The connected sbservices client to use.
- * @param pngdata Pointer that will point to a newly allocated buffer
- *     containing the PNG data upon successful return. It is up to the caller
- *     to free the memory.
- * @param pngsize Pointer to a uint64_t that will be set to the size of the
- *     buffer pngdata points to upon successful return.
- *
- * @return SBSERVICES_E_SUCCESS on success, SBSERVICES_E_INVALID_ARG when
- *     client or pngdata are invalid, or an SBSERVICES_E_* error
- *     code otherwise.
- */
 sbservices_error_t sbservices_get_home_screen_wallpaper_pngdata(sbservices_client_t client, char **pngdata, uint64_t *pngsize)
 {
 	if (!client || !client->parent || !pngdata)
diff --git a/src/screenshotr.c b/src/screenshotr.c
index a1b5759..e92fe9f 100644
--- a/src/screenshotr.c
+++ b/src/screenshotr.c
@@ -58,21 +58,6 @@ static screenshotr_error_t screenshotr_error(device_link_service_error_t err)
 	return SCREENSHOTR_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the screenshotr service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will be set to a newly allocated
- *     screenshotr_client_t upon successful return.
- *
- * @note This service is only available if a developer disk image has been
- *     mounted.
- *
- * @return SCREENSHOTR_E_SUCCESS on success, SCREENSHOTR_E_INVALID ARG if one
- *     or more parameters are invalid, or SCREENSHOTR_E_CONN_FAILED if the
- *     connection to the device could not be established.
- */
 screenshotr_error_t screenshotr_client_new(idevice_t device, lockdownd_service_descriptor_t service,
 					   screenshotr_client_t * client)
 {
@@ -101,19 +86,6 @@ screenshotr_error_t screenshotr_client_new(idevice_t device, lockdownd_service_d
 	return ret;
 }
 
-/**
- * Starts a new screenshotr service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     screenshotr_client_t upon successful return. Must be freed using
- *     screenshotr_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return SCREENSHOTR_E_SUCCESS on success, or an SCREENSHOTR_E_* error
- *     code otherwise.
- */
 screenshotr_error_t screenshotr_client_start_service(idevice_t device, screenshotr_client_t * client, const char* label)
 {
 	screenshotr_error_t err = SCREENSHOTR_E_UNKNOWN_ERROR;
@@ -121,15 +93,6 @@ screenshotr_error_t screenshotr_client_start_service(idevice_t device, screensho
 	return err;
 }
 
-/**
- * Disconnects a screenshotr client from the device and frees up the
- * screenshotr client data.
- *
- * @param client The screenshotr client to disconnect and free.
- *
- * @return SCREENSHOTR_E_SUCCESS on success, or SCREENSHOTR_E_INVALID_ARG
- *     if client is NULL.
- */
 screenshotr_error_t screenshotr_client_free(screenshotr_client_t client)
 {
 	if (!client)
@@ -140,20 +103,6 @@ screenshotr_error_t screenshotr_client_free(screenshotr_client_t client)
 	return err;
 }
 
-/**
- * Get a screen shot from the connected device.
- *
- * @param client The connection screenshotr service client.
- * @param imgdata Pointer that will point to a newly allocated buffer
- *     containing TIFF image data upon successful return. It is up to the
- *     caller to free the memory.
- * @param imgsize Pointer to a uint64_t that will be set to the size of the
- *     buffer imgdata points to upon successful return.
- *
- * @return SCREENSHOTR_E_SUCCESS on success, SCREENSHOTR_E_INVALID_ARG if
- *     one or more parameters are invalid, or another error code if an
- *     error occured.
- */
 screenshotr_error_t screenshotr_take_screenshot(screenshotr_client_t client, char **imgdata, uint64_t *imgsize)
 {
 	if (!client || !client->parent || !imgdata)
diff --git a/src/service.c b/src/service.c
index e8444b8..701c8b4 100644
--- a/src/service.c
+++ b/src/service.c
@@ -52,18 +52,6 @@ static service_error_t idevice_to_service_error(idevice_error_t err)
 	return SERVICE_E_UNKNOWN_ERROR;
 }
 
-/**
- * Creates a new service for the specified service descriptor.
- * 
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service. 
- * @param client Pointer that will be set to a newly allocated
- *     service_client_t upon successful return.
- *
- * @return SERVICE_E_SUCCESS on success,
- *     SERVICE_E_INVALID_ARG when one of the arguments is invalid,
- *     or SERVICE_E_MUX_ERROR when connecting to the device failed.
- */
 service_error_t service_client_new(idevice_t device, lockdownd_service_descriptor_t service, service_client_t *client)
 {
 	if (!device || !service || service->port == 0 || !client || *client)
@@ -88,21 +76,6 @@ service_error_t service_client_new(idevice_t device, lockdownd_service_descripto
 	return SERVICE_E_SUCCESS;
 }
 
-/**
- * Starts a new service on the specified device with given name and
- * connects to it.
- *
- * @param device The device to connect to.
- * @param service_name The name of the service to start.
- * @param client Pointer that will point to a newly allocated service_client_t
- *     upon successful return. Must be freed using service_client_free() after
- *     use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return SERVICE_E_SUCCESS on success, or a SERVICE_E_* error code
- *     otherwise.
- */
 service_error_t service_client_factory_start_service(idevice_t device, const char* service_name, void **client, const char* label, int16_t (*constructor_func)(idevice_t, lockdownd_service_descriptor_t, void**), int16_t *error_code)
 {
 	*client = NULL;
@@ -142,15 +115,6 @@ service_error_t service_client_factory_start_service(idevice_t device, const cha
 	return (ec == SERVICE_E_SUCCESS) ? SERVICE_E_SUCCESS : SERVICE_E_START_SERVICE_ERROR;
 }
 
-/**
- * Frees a service instance.
- *
- * @param client The service instance to free.
- *
- * @return SERVICE_E_SUCCESS on success,
- *     SERVICE_E_INVALID_ARG when client is invalid, or a
- *     SERVICE_E_UNKNOWN_ERROR when another error occured.
- */
 service_error_t service_client_free(service_client_t client)
 {
 	if (!client)
@@ -164,19 +128,6 @@ service_error_t service_client_free(service_client_t client)
 	return err;
 }
 
-/**
- * Sends data using the given service client.
- *
- * @param client The service client to use for sending.
- * @param data Data to send
- * @param size Size of the data to send
- * @param sent Number of bytes sent (can be NULL to ignore)
- *
- * @return SERVICE_E_SUCCESS on success,
- *      SERVICE_E_INVALID_ARG when one or more parameters are
- *      invalid, or SERVICE_E_UNKNOWN_ERROR when an unspecified
- *      error occurs.
- */
 service_error_t service_send(service_client_t client, const char* data, uint32_t size, uint32_t *sent)
 {
 	service_error_t res = SERVICE_E_UNKNOWN_ERROR;
@@ -198,21 +149,6 @@ service_error_t service_send(service_client_t client, const char* data, uint32_t
 	return res;
 }
  
-/**
- * Receives data using the given service client with specified timeout.
- *
- * @param client The service client to use for receiving
- * @param data Buffer that will be filled with the data received
- * @param size Number of bytes to receive
- * @param received Number of bytes received (can be NULL to ignore)
- * @param timeout Maximum time in milliseconds to wait for data.
- *
- * @return SERVICE_E_SUCCESS on success,
- *      SERVICE_E_INVALID_ARG when one or more parameters are
- *      invalid, SERVICE_E_MUX_ERROR when a communication error
- *      occurs, or SERVICE_E_UNKNOWN_ERROR when an unspecified
- *      error occurs.
- */
 service_error_t service_receive_with_timeout(service_client_t client, char* data, uint32_t size, uint32_t *received, unsigned int timeout)
 {
 	service_error_t res = SERVICE_E_UNKNOWN_ERROR;
@@ -233,35 +169,11 @@ service_error_t service_receive_with_timeout(service_client_t client, char* data
 	return res;
 }
 
-/**
- * Receives data using the given service client.
- *
- * @param client The service client to use for receiving
- * @param data Buffer that will be filled with the data received
- * @param size Number of bytes to receive
- * @param received Number of bytes received (can be NULL to ignore)
- *
- * @return SERVICE_E_SUCCESS on success,
- *      SERVICE_E_INVALID_ARG when one or more parameters are
- *      invalid, SERVICE_E_MUX_ERROR when a communication error
- *      occurs, or SERVICE_E_UNKNOWN_ERROR when an unspecified
- *      error occurs.
- */
 service_error_t service_receive(service_client_t client, char* data, uint32_t size, uint32_t *received)
 {
 	return service_receive_with_timeout(client, data, size, received, 10000);
 }
 
-/**
- * Enable SSL for the given service client.
- *
- * @param client The connected service client for that SSL should be enabled.
- *
- * @return SERVICE_E_SUCCESS on success,
- *     SERVICE_E_INVALID_ARG if client or client->connection is
- *     NULL, SERVICE_E_SSL_ERROR when SSL could not be enabled,
- *     or SERVICE_E_UNKNOWN_ERROR otherwise.
- */
 service_error_t service_enable_ssl(service_client_t client)
 {
 	if (!client || !client->connection)
@@ -269,15 +181,6 @@ service_error_t service_enable_ssl(service_client_t client)
 	return idevice_to_service_error(idevice_connection_enable_ssl(client->connection));
 }
 
-/**
- * Disable SSL for the given service client.
- *
- * @param client The connected service client for that SSL should be disabled.
- *
- * @return SERVICE_E_SUCCESS on success,
- *     SERVICE_E_INVALID_ARG if client or client->connection is
- *     NULL, or SERVICE_E_UNKNOWN_ERROR otherwise.
- */
 service_error_t service_disable_ssl(service_client_t client)
 {
 	if (!client || !client->connection)
diff --git a/src/syslog_relay.c b/src/syslog_relay.c
index b908153..a636e6e 100644
--- a/src/syslog_relay.c
+++ b/src/syslog_relay.c
@@ -61,18 +61,6 @@ static syslog_relay_error_t syslog_relay_error(service_error_t err)
 	return SYSLOG_RELAY_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the syslog_relay service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will point to a newly allocated
- *     syslog_relay_client_t upon successful return. Must be freed using
- *     syslog_relay_client_free() after use.
- *
- * @return SYSLOG_RELAY_E_SUCCESS on success, SYSLOG_RELAY_E_INVALID_ARG when
- *     client is NULL, or an SYSLOG_RELAY_E_* error code otherwise.
- */
 syslog_relay_error_t syslog_relay_client_new(idevice_t device, lockdownd_service_descriptor_t service, syslog_relay_client_t * client)
 {
 	*client = NULL;
@@ -101,19 +89,6 @@ syslog_relay_error_t syslog_relay_client_new(idevice_t device, lockdownd_service
 	return 0;
 }
 
-/**
- * Starts a new syslog_relay service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     syslog_relay_client_t upon successful return. Must be freed using
- *     syslog_relay_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return SYSLOG_RELAY_E_SUCCESS on success, or an SYSLOG_RELAY_E_* error
- *     code otherwise.
- */
 syslog_relay_error_t syslog_relay_client_start_service(idevice_t device, syslog_relay_client_t * client, const char* label)
 {
 	syslog_relay_error_t err = SYSLOG_RELAY_E_UNKNOWN_ERROR;
@@ -121,15 +96,6 @@ syslog_relay_error_t syslog_relay_client_start_service(idevice_t device, syslog_
 	return err;
 }
 
-/**
- * Disconnects a syslog_relay client from the device and frees up the
- * syslog_relay client data.
- *
- * @param client The syslog_relay client to disconnect and free.
- *
- * @return SYSLOG_RELAY_E_SUCCESS on success, SYSLOG_RELAY_E_INVALID_ARG when
- *     client is NULL, or an SYSLOG_RELAY_E_* error code otherwise.
- */
 syslog_relay_error_t syslog_relay_client_free(syslog_relay_client_t client)
 {
 	if (!client)
@@ -146,38 +112,11 @@ syslog_relay_error_t syslog_relay_client_free(syslog_relay_client_t client)
 	return err;
 }
 
-/**
- * Receives data from the service.
- *
- * @param client The syslog_relay client
- * @param data Buffer that will be filled with the data received
- * @param size Number of bytes to receive
- * @param received Number of bytes received (can be NULL to ignore)
- * @param timeout Maximum time in milliseconds to wait for data.
- *
- * @return SYSLOG_RELAY_E_SUCCESS on success,
- *  SYSLOG_RELAY_E_INVALID_ARG when client or plist is NULL
- */
 syslog_relay_error_t syslog_relay_receive(syslog_relay_client_t client, char* data, uint32_t size, uint32_t *received)
 {
 	return syslog_relay_receive_with_timeout(client, data, size, received, 1000);
 }
 
-/**
- * Receives data using the given syslog_relay client with specified timeout.
- *
- * @param client The syslog_relay client to use for receiving
- * @param data Buffer that will be filled with the data received
- * @param size Number of bytes to receive
- * @param received Number of bytes received (can be NULL to ignore)
- * @param timeout Maximum time in milliseconds to wait for data.
- *
- * @return SYSLOG_RELAY_E_SUCCESS on success,
- *      SYSLOG_RELAY_E_INVALID_ARG when one or more parameters are
- *      invalid, SYSLOG_RELAY_E_MUX_ERROR when a communication error
- *      occurs, or SYSLOG_RELAY_E_UNKNOWN_ERROR when an unspecified
- *      error occurs.
- */
 syslog_relay_error_t syslog_relay_receive_with_timeout(syslog_relay_client_t client, char* data, uint32_t size, uint32_t *received, unsigned int timeout)
 {
 	syslog_relay_error_t res = SYSLOG_RELAY_E_UNKNOWN_ERROR;
@@ -232,20 +171,6 @@ void *syslog_relay_worker(void *arg)
 	return NULL;
 }
 
-/**
- * Starts capturing the syslog of the device using a callback.
- *
- * Use syslog_relay_stop_capture() to stop receiving the syslog.
- *
- * @param client The syslog_relay client to use
- * @param callback Callback to receive each character from the syslog.
- * @param user_data Custom pointer passed to the callback function.
- *
- * @return SYSLOG_RELAY_E_SUCCESS on success,
- *      SYSLOG_RELAY_E_INVALID_ARG when one or more parameters are
- *      invalid or SYSLOG_RELAY_E_UNKNOWN_ERROR when an unspecified
- *      error occurs or a syslog capture has already been started.
- */
 syslog_relay_error_t syslog_relay_start_capture(syslog_relay_client_t client, syslog_relay_receive_cb_t callback, void* user_data)
 {
 	if (!client || !callback)
@@ -273,18 +198,6 @@ syslog_relay_error_t syslog_relay_start_capture(syslog_relay_client_t client, sy
 	return res;
 }
 
-/**
- * Stops capturing the syslog of the device.
- *
- * Use syslog_relay_start_capture() to start receiving the syslog.
- *
- * @param client The syslog_relay client to use
- *
- * @return SYSLOG_RELAY_E_SUCCESS on success,
- *      SYSLOG_RELAY_E_INVALID_ARG when one or more parameters are
- *      invalid or SYSLOG_RELAY_E_UNKNOWN_ERROR when an unspecified
- *      error occurs or a syslog capture has already been started.
- */
 syslog_relay_error_t syslog_relay_stop_capture(syslog_relay_client_t client)
 {
 	if (client->worker) {
diff --git a/src/webinspector.c b/src/webinspector.c
index 14a8bd8..31c5b2c 100644
--- a/src/webinspector.c
+++ b/src/webinspector.c
@@ -58,18 +58,6 @@ static webinspector_error_t webinspector_error(property_list_service_error_t err
 	return WEBINSPECTOR_E_UNKNOWN_ERROR;
 }
 
-/**
- * Connects to the webinspector service on the specified device.
- *
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will point to a newly allocated
- *     webinspector_client_t upon successful return. Must be freed using
- *     webinspector_client_free() after use.
- *
- * @return WEBINSPECTOR_E_SUCCESS on success, WEBINSPECTOR_E_INVALID_ARG when
- *     client is NULL, or an WEBINSPECTOR_E_* error code otherwise.
- */
 webinspector_error_t webinspector_client_new(idevice_t device, lockdownd_service_descriptor_t service, webinspector_client_t * client)
 {
 	*client = NULL;
@@ -97,19 +85,6 @@ webinspector_error_t webinspector_client_new(idevice_t device, lockdownd_service
 	return 0;
 }
 
-/**
- * Starts a new webinspector service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     webinspector_client_t upon successful return. Must be freed using
- *     webinspector_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return WEBINSPECTOR_E_SUCCESS on success, or an WEBINSPECTOR_E_* error
- *     code otherwise.
- */
 webinspector_error_t webinspector_client_start_service(idevice_t device, webinspector_client_t * client, const char* label)
 {
 	webinspector_error_t err = WEBINSPECTOR_E_UNKNOWN_ERROR;
@@ -117,15 +92,6 @@ webinspector_error_t webinspector_client_start_service(idevice_t device, webinsp
 	return err;
 }
 
-/**
- * Disconnects a webinspector client from the device and frees up the
- * webinspector client data.
- *
- * @param client The webinspector client to disconnect and free.
- *
- * @return WEBINSPECTOR_E_SUCCESS on success, WEBINSPECTOR_E_INVALID_ARG when
- *     client is NULL, or an WEBINSPECTOR_E_* error code otherwise.
- */
 webinspector_error_t webinspector_client_free(webinspector_client_t client)
 {
 	if (!client)
@@ -137,15 +103,6 @@ webinspector_error_t webinspector_client_free(webinspector_client_t client)
 	return err;
 }
 
-/**
- * Sends a plist to the service.
- *
- * @param client The webinspector client
- * @param plist The plist to send
- *
- * @return DIAGNOSTICS_RELAY_E_SUCCESS on success,
- *  DIAGNOSTICS_RELAY_E_INVALID_ARG when client or plist is NULL
- */
 webinspector_error_t webinspector_send(webinspector_client_t client, plist_t plist)
 {
 	webinspector_error_t res = WEBINSPECTOR_E_UNKNOWN_ERROR;
@@ -203,35 +160,11 @@ webinspector_error_t webinspector_send(webinspector_client_t client, plist_t pli
 	return res;
 }
 
-/**
- * Receives a plist from the service.
- *
- * @param client The webinspector client
- * @param plist The plist to store the received data
- *
- * @return DIAGNOSTICS_RELAY_E_SUCCESS on success,
- *  DIAGNOSTICS_RELAY_E_INVALID_ARG when client or plist is NULL
- */
 webinspector_error_t webinspector_receive(webinspector_client_t client, plist_t * plist)
 {
 	return webinspector_receive_with_timeout(client, plist, 5000);
 }
 
-/**
- * Receives a plist using the given webinspector client.
- *
- * @param client The webinspector client to use for receiving
- * @param plist pointer to a plist_t that will point to the received plist
- *      upon successful return
- * @param timeout Maximum time in milliseconds to wait for data.
- *
- * @return WEBINSPECTOR_E_SUCCESS on success,
- *      WEBINSPECTOR_E_INVALID_ARG when client or *plist is NULL,
- *      WEBINSPECTOR_E_PLIST_ERROR when the received data cannot be
- *      converted to a plist, WEBINSPECTOR_E_MUX_ERROR when a
- *      communication error occurs, or WEBINSPECTOR_E_UNKNOWN_ERROR
- *      when an unspecified error occurs.
- */
 webinspector_error_t webinspector_receive_with_timeout(webinspector_client_t client, plist_t * plist, uint32_t timeout_ms)
 {
 	webinspector_error_t res = WEBINSPECTOR_E_UNKNOWN_ERROR;