1 files changed, 0 insertions, 212 deletions

diff --git a/src/afc.c b/src/afc.c
index dd75558..b5203f1 100644
--- a/src/afc.c
+++ b/src/afc.c
@@ -95,18 +95,6 @@ afc_error_t afc_client_new_with_service_client(service_client_t service_client,
         return AFC_E_SUCCESS;
 }
 
-/**
- * Makes a connection to the AFC service on the device.
- * 
- * @param device The device to connect to.
- * @param service The service descriptor returned by lockdownd_start_service.
- * @param client Pointer that will be set to a newly allocated afc_client_t
- *     upon successful return.
- * 
- * @return AFC_E_SUCCESS on success, AFC_E_INVALID_ARG if device or service is
- *  invalid, AFC_E_MUX_ERROR if the connection cannot be established,
- *  or AFC_E_NO_MEM if there is a memory allocation problem.
- */
 afc_error_t afc_client_new(idevice_t device, lockdownd_service_descriptor_t service, afc_client_t * client)
 {
         if (!device || !service || service->port == 0)
@@ -126,19 +114,6 @@ afc_error_t afc_client_new(idevice_t device, lockdownd_service_descriptor_t serv
         return err;
 }
 
-/**
- * Starts a new AFC service on the specified device and connects to it.
- *
- * @param device The device to connect to.
- * @param client Pointer that will point to a newly allocated
- *     afc_client_t upon successful return. Must be freed using
- *     afc_client_free() after use.
- * @param label The label to use for communication. Usually the program name.
- *  Pass NULL to disable sending the label in requests to lockdownd.
- *
- * @return AFC_E_SUCCESS on success, or an AFC_E_* error
- *     code otherwise.
- */
 afc_error_t afc_client_start_service(idevice_t device, afc_client_t * client, const char* label)
 {
         afc_error_t err = AFC_E_UNKNOWN_ERROR;
@@ -146,12 +121,6 @@ afc_error_t afc_client_start_service(idevice_t device, afc_client_t * client, co
         return err;
 }
 
-/**
- * Frees up an AFC client. If the connection was created by the
- * client itself, the connection will be closed.
- * 
- * @param client The client to free.
- */
 afc_error_t afc_client_free(afc_client_t client)
 {
         if (!client || !client->afc_packet)
@@ -432,16 +401,6 @@ static char **make_strings_list(char *tokens, uint32_t length)
         return list;
 }
 
-/**
- * Gets a directory listing of the directory requested.
- * 
- * @param client The client to get a directory listing from.
- * @param dir The directory to list. (must be a fully-qualified path)
- * @param list A char list of files in that directory, terminated by an empty
- *         string or NULL if there was an error.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_read_directory(afc_client_t client, const char *dir, char ***list)
 {
         uint32_t bytes = 0;
@@ -478,17 +437,6 @@ afc_error_t afc_read_directory(afc_client_t client, const char *dir, char ***lis
         return ret;
 }
 
-/**
- * Get device information for a connected client. The device information
- * returned is the device model as well as the free space, the total capacity
- * and blocksize on the accessed disk partition.
- * 
- * @param client The client to get device info for.
- * @param infos A char ** list of parameters as given by AFC or NULL if there
- *  was an error.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_get_device_info(afc_client_t client, char ***infos)
 {
         uint32_t bytes = 0;
@@ -526,17 +474,6 @@ afc_error_t afc_get_device_info(afc_client_t client, char ***infos)
         return ret;
 }
 
-/**
- * Get a specific key of the device info list for a client connection.
- * Known key values are: Model, FSTotalBytes, FSFreeBytes and FSBlockSize.
- * This is a helper function for afc_get_device_info().
- *
- * @param client The client to get device info for.
- * @param key The key to get the value of.
- * @param value The value for the key if successful or NULL otherwise.
- *
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_get_device_info_key(afc_client_t client, const char *key, char **value)
 {
         afc_error_t ret = AFC_E_INTERNAL_ERROR;
@@ -564,14 +501,6 @@ afc_error_t afc_get_device_info_key(afc_client_t client, const char *key, char *
         return ret;
 }
 
-/**
- * Deletes a file or directory.
- * 
- * @param client The client to use.
- * @param path The path to delete. (must be a fully-qualified path)
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_remove_path(afc_client_t client, const char *path)
 {
         uint32_t bytes = 0;
@@ -600,15 +529,6 @@ afc_error_t afc_remove_path(afc_client_t client, const char *path)
         return ret;
 }
 
-/**
- * Renames a file or directory on the device.
- * 
- * @param client The client to have rename.
- * @param from The name to rename from. (must be a fully-qualified path)
- * @param to The new name. (must also be a fully-qualified path)
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_rename_path(afc_client_t client, const char *from, const char *to)
 {
         char *buffer = (char *) malloc(sizeof(char) * (strlen(from) + strlen(to) + 1 + sizeof(uint32_t)));
@@ -638,15 +558,6 @@ afc_error_t afc_rename_path(afc_client_t client, const char *from, const char *t
         return ret;
 }
 
-/**
- * Creates a directory on the device.
- * 
- * @param client The client to use to make a directory.
- * @param dir The directory's path. (must be a fully-qualified path, I assume
- *        all other mkdir restrictions apply as well)
- *
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_make_directory(afc_client_t client, const char *dir)
 {
         uint32_t bytes = 0;
@@ -671,17 +582,6 @@ afc_error_t afc_make_directory(afc_client_t client, const char *dir)
         return ret;
 }
 
-/**
- * Gets information about a specific file.
- * 
- * @param client The client to use to get the information of the file.
- * @param path The fully-qualified path to the file. 
- * @param infolist Pointer to a buffer that will be filled with a NULL-terminated
- *                 list of strings with the file information.
- *                 Set to NULL before calling this function.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_get_file_info(afc_client_t client, const char *path, char ***infolist)
 {
         char *received = NULL;
@@ -712,19 +612,6 @@ afc_error_t afc_get_file_info(afc_client_t client, const char *path, char ***inf
         return ret;
 }
 
-/**
- * Opens a file on the device.
- * 
- * @param client The client to use to open the file. 
- * @param filename The file to open. (must be a fully-qualified path)
- * @param file_mode The mode to use to open the file. Can be AFC_FILE_READ or
- *                  AFC_FILE_WRITE; the former lets you read and write,
- *                  however, and the second one will *create* the file,
- *                  destroying anything previously there.
- * @param handle Pointer to a uint64_t that will hold the handle of the file
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 idevice_error_t
 afc_file_open(afc_client_t client, const char *filename,
                                          afc_file_mode_t file_mode, uint64_t *handle)
@@ -772,17 +659,6 @@ afc_file_open(afc_client_t client, const char *filename,
         return ret;
 }
 
-/**
- * Attempts to the read the given number of bytes from the given file.
- * 
- * @param client The relevant AFC client
- * @param handle File handle of a previously opened file
- * @param data The pointer to the memory region to store the read data
- * @param length The number of bytes to read
- * @param bytes_read The number of bytes actually read.
- *
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 idevice_error_t
 afc_file_read(afc_client_t client, uint64_t handle, char *data, uint32_t length, uint32_t *bytes_read)
 {
@@ -837,17 +713,6 @@ afc_file_read(afc_client_t client, uint64_t handle, char *data, uint32_t length,
         return ret;
 }
 
-/**
- * Writes a given number of bytes to a file.
- * 
- * @param client The client to use to write to the file.
- * @param handle File handle of previously opened file. 
- * @param data The data to write to the file.
- * @param length How much data to write.
- * @param bytes_written The number of bytes actually written to the file.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 idevice_error_t
 afc_file_write(afc_client_t client, uint64_t handle, const char *data, uint32_t length, uint32_t *bytes_written)
 {
@@ -881,12 +746,6 @@ afc_file_write(afc_client_t client, uint64_t handle, const char *data, uint32_t
         return ret;
 }
 
-/**
- * Closes a file on the device.
- * 
- * @param client The client to close the file with.
- * @param handle File handle of a previously opened file.
- */
 afc_error_t afc_file_close(afc_client_t client, uint64_t handle)
 {
         uint32_t bytes = 0;
@@ -915,18 +774,6 @@ afc_error_t afc_file_close(afc_client_t client, uint64_t handle)
         return ret;
 }
 
-/**
- * Locks or unlocks a file on the device. 
- *
- * makes use of flock on the device, see
- * http://developer.apple.com/documentation/Darwin/Reference/ManPages/man2/flock.2.html
- *
- * @param client The client to lock the file with.
- * @param handle File handle of a previously opened file.
- * @param operation the lock or unlock operation to perform, this is one of
- *        AFC_LOCK_SH (shared lock), AFC_LOCK_EX (exclusive lock),
- *        or AFC_LOCK_UN (unlock).
- */
 afc_error_t afc_file_lock(afc_client_t client, uint64_t handle, afc_lock_op_t operation)
 {
         uint32_t bytes = 0;
@@ -961,16 +808,6 @@ afc_error_t afc_file_lock(afc_client_t client, uint64_t handle, afc_lock_op_t op
         return ret;
 }
 
-/**
- * Seeks to a given position of a pre-opened file on the device. 
- * 
- * @param client The client to use to seek to the position.
- * @param handle File handle of a previously opened.
- * @param offset Seek offset.
- * @param whence Seeking direction, one of SEEK_SET, SEEK_CUR, or SEEK_END.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_file_seek(afc_client_t client, uint64_t handle, int64_t offset, int whence)
 {
         uint32_t bytes = 0;
@@ -1004,15 +841,6 @@ afc_error_t afc_file_seek(afc_client_t client, uint64_t handle, int64_t offset,
         return ret;
 }
 
-/**
- * Returns current position in a pre-opened file on the device.
- * 
- * @param client The client to use.
- * @param handle File handle of a previously opened file.
- * @param position Position in bytes of indicator
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_file_tell(afc_client_t client, uint64_t handle, uint64_t *position)
 {
         char *buffer = (char *) malloc(sizeof(char) * 8);
@@ -1047,18 +875,6 @@ afc_error_t afc_file_tell(afc_client_t client, uint64_t handle, uint64_t *positi
         return ret;
 }
 
-/**
- * Sets the size of a file on the device.
- * 
- * @param client The client to use to set the file size.
- * @param handle File handle of a previously opened file.
- * @param newsize The size to set the file to. 
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- * 
- * @note This function is more akin to ftruncate than truncate, and truncate
- *       calls would have to open the file before calling this, sadly.
- */
 afc_error_t afc_file_truncate(afc_client_t client, uint64_t handle, uint64_t newsize)
 {
         uint32_t bytes = 0;
@@ -1090,15 +906,6 @@ afc_error_t afc_file_truncate(afc_client_t client, uint64_t handle, uint64_t new
         return ret;
 }
 
-/**
- * Sets the size of a file on the device without prior opening it.
- * 
- * @param client The client to use to set the file size.
- * @param path The path of the file to be truncated.
- * @param newsize The size to set the file to. 
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_truncate(afc_client_t client, const char *path, uint64_t newsize)
 {
         char *buffer = (char *) malloc(sizeof(char) * (strlen(path) + 1 + 8));
@@ -1129,16 +936,6 @@ afc_error_t afc_truncate(afc_client_t client, const char *path, uint64_t newsize
         return ret;
 }
 
-/**
- * Creates a hard link or symbolic link on the device. 
- * 
- * @param client The client to use for making a link
- * @param linktype 1 = hard link, 2 = symlink
- * @param target The file to be linked.
- * @param linkname The name of link.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_make_link(afc_client_t client, afc_link_type_t linktype, const char *target, const char *linkname)
 {
         char *buffer = (char *) malloc(sizeof(char) * (strlen(target)+1 + strlen(linkname)+1 + 8));
@@ -1173,15 +970,6 @@ afc_error_t afc_make_link(afc_client_t client, afc_link_type_t linktype, const c
         return ret;
 }
 
-/**
- * Sets the modification time of a file on the device.
- * 
- * @param client The client to use to set the file size.
- * @param path Path of the file for which the modification time should be set.
- * @param mtime The modification time to set in nanoseconds since epoch.
- * 
- * @return AFC_E_SUCCESS on success or an AFC_E_* error value.
- */
 afc_error_t afc_set_file_time(afc_client_t client, const char *path, uint64_t mtime)
 {
         char *buffer = (char *) malloc(sizeof(char) * (strlen(path) + 1 + 8));