From da94f0ebc7232e8e9d0e629fe559b7bc93d9a1c6 Mon Sep 17 00:00:00 2001 From: Martin Szulecki Date: Sat, 25 Jul 2009 18:12:49 +0200 Subject: Update doxygen config and allow generation of documentation --- doxygen.cfg | 269 +++++++++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 196 insertions(+), 73 deletions(-) (limited to 'doxygen.cfg') diff --git a/doxygen.cfg b/doxygen.cfg index 990802c..0942031 100644 --- a/doxygen.cfg +++ b/doxygen.cfg @@ -1,4 +1,4 @@ -# Doxyfile 1.5.3 +# Doxyfile 1.5.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project @@ -14,11 +14,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file that -# follow. The default is UTF-8 which is also the encoding used for all text before -# the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into -# libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of -# possible encodings. +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. DOXYFILE_ENCODING = UTF-8 @@ -31,7 +31,7 @@ PROJECT_NAME = libiphone # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.1.0 +PROJECT_NUMBER = 0.9.1 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # base path where the generated documentation will be put. @@ -54,10 +54,11 @@ CREATE_SUBDIRS = NO # information to generate all constant output in the proper language. # The default language is English, other supported languages are: # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, -# Italian, Japanese, Japanese-en (Japanese with English messages), Korean, -# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, -# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. +# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, +# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, +# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, +# and Ukrainian. OUTPUT_LANGUAGE = English @@ -113,7 +114,7 @@ FULL_PATH_NAMES = YES # If left blank the directory from which doxygen is run is used as the # path to strip. -STRIP_FROM_PATH = +STRIP_FROM_PATH = include # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of # the path mentioned in the documentation of a class, which tells @@ -195,14 +196,26 @@ ALIASES = OPTIMIZE_OUTPUT_FOR_C = YES # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for Java. -# For instance, namespaces will be presented as packages, qualified scopes -# will look different, etc. +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. OPTIMIZE_OUTPUT_JAVA = NO -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to -# include (a tag file for) the STL sources as input, then you should +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. # func(std::string) {}). This also make the inheritance and collaboration @@ -215,6 +228,21 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen to replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC # tag is set to YES, then doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default @@ -228,7 +256,17 @@ DISTRIBUTE_GROUP_DOC = NO # NO to prevent subgrouping. Alternatively, this can be done per class using # the \nosubgrouping command. -SUBGROUPING = YES +SUBGROUPING = NO + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = YES #--------------------------------------------------------------------------- # Build related configuration options @@ -239,7 +277,7 @@ SUBGROUPING = YES # Private class members and static file members will be hidden unless # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES -EXTRACT_ALL = YES +EXTRACT_ALL = NO # If the EXTRACT_PRIVATE tag is set to YES all private members of a class # will be included in the documentation. @@ -255,7 +293,7 @@ EXTRACT_STATIC = NO # defined locally in source files will be included in the documentation. # If set to NO only classes defined in header files are included. -EXTRACT_LOCAL_CLASSES = YES +EXTRACT_LOCAL_CLASSES = NO # This flag is only useful for Objective-C code. When set to YES local # methods, which are defined in the implementation section but not in @@ -264,10 +302,11 @@ EXTRACT_LOCAL_CLASSES = YES EXTRACT_LOCAL_METHODS = NO -# If this flag is set to YES, the members of anonymous namespaces will be extracted -# and appear in the documentation as a namespace called 'anonymous_namespace{file}', -# where file will be replaced with the base name of the file that contains the anonymous -# namespace. By default anonymous namespace are hidden. +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespace are hidden. EXTRACT_ANON_NSPACES = NO @@ -313,7 +352,7 @@ INTERNAL_DOCS = NO # in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. -CASE_SENSE_NAMES = YES +CASE_SENSE_NAMES = NO # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen # will show members with their full class and namespace scopes in the @@ -325,7 +364,7 @@ HIDE_SCOPE_NAMES = NO # will put a list of the files that are included by a file in the documentation # of that file. -SHOW_INCLUDE_FILES = YES +SHOW_INCLUDE_FILES = NO # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # is inserted in the documentation for inline members. @@ -346,6 +385,12 @@ SORT_MEMBER_DOCS = YES SORT_BRIEF_DOCS = NO +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be # sorted by fully-qualified names, including namespaces. If set to # NO (the default), the class list will be sorted only by class name, @@ -407,9 +452,21 @@ SHOW_USED_FILES = YES SHOW_DIRECTORIES = NO +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + # The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from the -# version control system). Doxygen will invoke the program by executing (via +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via # popen()) the command , where is the value of # the FILE_VERSION_FILTER tag, and is the name of an input file # provided by doxygen. Whatever the program writes to standard output @@ -477,12 +534,13 @@ WARN_LOGFILE = # directories like "/usr/src/myproject". Separate the files or directories # with spaces. -INPUT = src +INPUT = src include/libiphone -# This tag can be used to specify the character encoding of the source files that -# doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default -# input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. -# See http://www.gnu.org/software/libiconv for the list of possible encodings. +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. INPUT_ENCODING = UTF-8 @@ -491,7 +549,7 @@ INPUT_ENCODING = UTF-8 # and *.h) to filter out the source-files in the directories. If left # blank the following patterns are tested: # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 FILE_PATTERNS = @@ -505,7 +563,7 @@ RECURSIVE = NO # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. -EXCLUDE = src/main.c src/ifuse.c +EXCLUDE = dev # The EXCLUDE_SYMLINKS tag can be used select whether or not files or # directories that are symbolic links (a Unix filesystem feature) are excluded @@ -522,9 +580,10 @@ EXCLUDE_SYMLINKS = NO EXCLUDE_PATTERNS = # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the output. -# The symbol name can be a fully qualified name, a word, or if the wildcard * is used, -# a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test EXCLUDE_SYMBOLS = @@ -586,11 +645,9 @@ FILTER_SOURCE_FILES = NO # If the SOURCE_BROWSER tag is set to YES then a list of source files will # be generated. Documented entities will be cross-referenced with these sources. # Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH -# then you must also enable this option. If you don't then doxygen will produce -# a warning and turn it on anyway +# VERBATIM_HEADERS is set to NO. -SOURCE_BROWSER = YES +SOURCE_BROWSER = NO # Setting the INLINE_SOURCES tag to YES will include the body # of functions and classes directly in the documentation. @@ -603,13 +660,13 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES -# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# If the REFERENCED_BY_RELATION tag is set to YES # then for each documented function all documented # functions referencing it will be listed. REFERENCED_BY_RELATION = YES -# If the REFERENCES_RELATION tag is set to YES (the default) +# If the REFERENCES_RELATION tag is set to YES # then for each documented function all documented entities # called/used by that function will be listed. @@ -634,7 +691,7 @@ USE_HTAGS = NO # will generate a verbatim copy of the header file for each class for # which an include is specified. Set to NO to disable this. -VERBATIM_HEADERS = YES +VERBATIM_HEADERS = NO #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index @@ -709,11 +766,36 @@ HTML_ALIGN_MEMBERS = YES # If the GENERATE_HTMLHELP tag is set to YES, additional index files # will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) # of the generated HTML documentation. GENERATE_HTMLHELP = NO +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -742,6 +824,12 @@ HHC_LOCATION = GENERATE_CHI = NO +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag # controls whether a binary table of contents is generated (YES) or a # normal table of contents (NO) in the .chm file. @@ -764,14 +852,22 @@ DISABLE_INDEX = NO ENUM_VALUES_PER_LINE = 4 -# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be -# generated containing a tree-like index structure (just like the one that +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to FRAME, a side panel will be generated +# containing a tree-like index structure (just like the one that # is generated for HTML Help). For this to work a browser that supports # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are -# probably better off using the HTML help feature. +# probably better off using the HTML help feature. Other possible values +# for this tag are: HIERARCHIES, which will generate the Groups, Directories, +# and Class Hiererachy pages using a tree view instead of an ordered list; +# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which +# disables this behavior completely. For backwards compatibility with previous +# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE +# respectively. -GENERATE_TREEVIEW = YES +GENERATE_TREEVIEW = NONE # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree @@ -779,6 +875,14 @@ GENERATE_TREEVIEW = YES TREEVIEW_WIDTH = 250 +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- @@ -1031,7 +1135,7 @@ EXPAND_ONLY_PREDEF = NO # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # in the INCLUDE_PATH (see below) will be search if a #include is found. -SEARCH_INCLUDES = YES +SEARCH_INCLUDES = NO # The INCLUDE_PATH tag can be used to specify one or more directories that # contain include files that are not input files but should be processed by @@ -1128,10 +1232,11 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = YES # You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to -# produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to -# specify the directory where the mscgen tool resides. If left empty the tool is assumed to -# be found in the default search path. +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. MSCGEN_PATH = @@ -1148,6 +1253,24 @@ HIDE_UNDOC_RELATIONS = YES HAVE_DOT = NO +# By default doxygen will write a font called FreeSans.ttf to the output +# directory and reference it in all dot files that doxygen generates. This +# font does not include all possible unicode characters however, so when you need +# these (or just want a differently looking font) you can specify the font name +# using DOT_FONTNAME. You need need to make sure dot is able to find the font, +# which can be done by putting it in a standard location or by setting the +# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory +# containing the font. + +DOT_FONTNAME = FreeSans + +# By default doxygen will tell dot to use the output directory to look for the +# FreeSans.ttf font (which doxygen will put there itself). If you specify a +# different font using DOT_FONTNAME you can set the path where dot +# can find it using this tag. + +DOT_FONTPATH = + # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen # will generate a graph for each documented class showing the direct and # indirect inheritance relations. Setting this tag to YES will force the @@ -1192,19 +1315,19 @@ INCLUDE_GRAPH = YES INCLUDED_BY_GRAPH = YES -# If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will -# generate a call dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. CALL_GRAPH = NO -# If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will -# generate a caller dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. CALLER_GRAPH = NO @@ -1237,12 +1360,12 @@ DOT_PATH = DOTFILE_DIRS = -# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of # nodes that will be shown in the graph. If the number of nodes in a graph # becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the number -# of direct children of the root node in a graph is already larger than -# MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. DOT_GRAPH_MAX_NODES = 50 @@ -1258,10 +1381,10 @@ DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 0 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, which results in a white background. -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). +# background. This is enabled by default, which results in a transparent +# background. Warning: Depending on the platform used, enabling this option +# may lead to badly anti-aliased labels on the edges of a graph (i.e. they +# become hard to read). DOT_TRANSPARENT = NO -- cgit v1.1-32-gdbae