diff options
Diffstat (limited to 'include/libimobiledevice/mobilebackup2.h')
| -rw-r--r-- | include/libimobiledevice/mobilebackup2.h | 214 |
1 files changed, 214 insertions, 0 deletions
diff --git a/include/libimobiledevice/mobilebackup2.h b/include/libimobiledevice/mobilebackup2.h new file mode 100644 index 0000000..2e9222d --- /dev/null +++ b/include/libimobiledevice/mobilebackup2.h @@ -0,0 +1,214 @@ +/** + * @file libimobiledevice/mobilebackup2.h + * @brief Backup and restore of all device data (mobilebackup2, iOS4+ only) + * \internal + * + * Copyright (c) 2010-2019 Nikias Bassen, All Rights Reserved. + * Copyright (c) 2011-2014 Martin Szulecki, All Rights Reserved. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef IMOBILEBACKUP2_H +#define IMOBILEBACKUP2_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include <libimobiledevice/libimobiledevice.h> +#include <libimobiledevice/lockdown.h> + +/** Service identifier passed to lockdownd_start_service() to start the mobilebackup2 service */ +#define MOBILEBACKUP2_SERVICE_NAME "com.apple.mobilebackup2" + +/** Error Codes */ +typedef enum { + MOBILEBACKUP2_E_SUCCESS = 0, + MOBILEBACKUP2_E_INVALID_ARG = -1, + MOBILEBACKUP2_E_PLIST_ERROR = -2, + MOBILEBACKUP2_E_MUX_ERROR = -3, + MOBILEBACKUP2_E_SSL_ERROR = -4, + MOBILEBACKUP2_E_RECEIVE_TIMEOUT = -5, + MOBILEBACKUP2_E_BAD_VERSION = -6, + MOBILEBACKUP2_E_REPLY_NOT_OK = -7, + MOBILEBACKUP2_E_NO_COMMON_VERSION = -8, + MOBILEBACKUP2_E_UNKNOWN_ERROR = -256 +} mobilebackup2_error_t; + +typedef struct mobilebackup2_client_private mobilebackup2_client_private; /**< \private */ +typedef mobilebackup2_client_private *mobilebackup2_client_t; /**< The client handle. */ + + +/** + * Connects to the mobilebackup2 service on the specified device. + * + * @param device The device to connect to. + * @param service The service descriptor returned by lockdownd_start_service. + * @param client Pointer that will be set to a newly allocated + * mobilebackup2_client_t upon successful return. + * + * @return MOBILEBACKUP2_E_SUCCESS on success, MOBILEBACKUP2_E_INVALID ARG + * if one or more parameter is invalid, or MOBILEBACKUP2_E_BAD_VERSION + * if the mobilebackup2 version on the device is newer. + */ +LIBIMOBILEDEVICE_API mobilebackup2_error_t mobilebackup2_client_new(idevice_t device, lockdownd_service_descriptor_t service, mobilebackup2_client_t * client); + +/** + * Starts a new mobilebackup2 service on the specified device and connects to it. + * + * @param device The device to connect to. + * @param client Pointer that will point to a newly allocated + * mobilebackup2_client_t upon successful return. Must be freed using + * mobilebackup2_client_free() after use. + * @param label The label to use for communication. Usually the program name. + * Pass NULL to disable sending the label in requests to lockdownd. + * + * @return MOBILEBACKUP2_E_SUCCESS on success, or an MOBILEBACKUP2_E_* error + * code otherwise. + */ +LIBIMOBILEDEVICE_API mobilebackup2_error_t mobilebackup2_client_start_service(idevice_t device, mobilebackup2_client_t* client, const char* label); + +/** + * Disconnects a mobilebackup2 client from the device and frees up the + * mobilebackup2 client data. + * + * @param client The mobilebackup2 client to disconnect and free. + * + * @return MOBILEBACKUP2_E_SUCCESS on success, or MOBILEBACKUP2_E_INVALID_ARG + * if client is NULL. + */ +LIBIMOBILEDEVICE_API mobilebackup2_error_t mobilebackup2_client_free(mobilebackup2_client_t client); + + +/** + * Sends a backup message plist. + * + * @param client The connected MobileBackup client to use. + * @param message The message to send. This will be inserted into the request + * plist as value for MessageName. If this parameter is NULL, + * the plist passed in the options parameter will be sent directly. + * @param options Additional options as PLIST_DICT to add to the request. + * The MessageName key with the value passed in the message parameter + * will be inserted into this plist before sending it. This parameter + * can be NULL if message is not NULL. + */ +LIBIMOBILEDEVICE_API mobilebackup2_error_t mobilebackup2_send_message(mobilebackup2_client_t client, const char *message, plist_t options); + +/** + * Receives a DL* message plist from the device. + * This function is a wrapper around device_link_service_receive_message. + * + * @param client The connected MobileBackup client to use. + * @param msg_plist Pointer to a plist that will be set to the contents of the + * message plist upon successful return. + * @param dlmessage A pointer that will be set to a newly allocated char* + * containing the DL* string from the given plist. It is up to the caller + * to free the allocated memory. If this parameter is NULL + * it will be ignored. + * + * @return MOBILEBACKUP2_E_SUCCESS if a DL* message was received, + * MOBILEBACKUP2_E_INVALID_ARG if client or message is invalid, + * MOBILEBACKUP2_E_PLIST_ERROR if the received plist is invalid + * or is not a DL* message plist, or MOBILEBACKUP2_E_MUX_ERROR if + * receiving from the device failed. + */ +LIBIMOBILEDEVICE_API mobilebackup2_error_t mobilebackup2_receive_message(mobilebackup2_client_t client, plist_t *msg_plist, char **dlmessage); + +/** + * Send binary data to the device. + * + * @note This function returns MOBILEBACKUP2_E_SUCCESS even if less than the + * requested length has been sent. The fourth parameter is required and + * must be checked to ensure if the whole data has been sent. + * + * @param client The MobileBackup client to send to. + * @param data Pointer to the data to send + * @param length Number of bytes to send + * @param bytes Number of bytes actually sent + * + * @return MOBILEBACKUP2_E_SUCCESS if any data was successfully sent, + * MOBILEBACKUP2_E_INVALID_ARG if one of the parameters is invalid, + * or MOBILEBACKUP2_E_MUX_ERROR if sending of the data failed. + */ +LIBIMOBILEDEVICE_API mobilebackup2_error_t mobilebackup2_send_raw(mobilebackup2_client_t client, const char *data, uint32_t length, uint32_t *bytes); + +/** + * Receive binary from the device. + * + * @note This function returns MOBILEBACKUP2_E_SUCCESS even if no data + * has been received (unless a communication error occurred). + * The fourth parameter is required and must be checked to know how + * many bytes were actually received. + * + * @param client The MobileBackup client to receive from. + * @param data Pointer to a buffer that will be filled with the received data. + * @param length Number of bytes to receive. The data buffer needs to be large + * enough to store this amount of data. + * @param bytes Number of bytes actually received. + * + * @return MOBILEBACKUP2_E_SUCCESS if any or no data was received, + * MOBILEBACKUP2_E_INVALID_ARG if one of the parameters is invalid, + * or MOBILEBACKUP2_E_MUX_ERROR if receiving the data failed. + */ +LIBIMOBILEDEVICE_API mobilebackup2_error_t mobilebackup2_receive_raw(mobilebackup2_client_t client, char *data, uint32_t length, uint32_t *bytes); + +/** + * Performs the mobilebackup2 protocol version exchange. + * + * @param client The MobileBackup client to use. + * @param local_versions An array of supported versions to send to the remote. + * @param count The number of items in local_versions. + * @param remote_version Holds the protocol version of the remote on success. + * + * @return MOBILEBACKUP2_E_SUCCESS on success, or a MOBILEBACKUP2_E_* error + * code otherwise. + */ +LIBIMOBILEDEVICE_API mobilebackup2_error_t mobilebackup2_version_exchange(mobilebackup2_client_t client, double local_versions[], char count, double *remote_version); + +/** + * Send a request to the connected mobilebackup2 service. + * + * @param client + * @param request The request to send to the backup service. + * Currently, this is one of "Backup", "Restore", "Info", or "List". + * @param target_identifier UDID of the target device. + * @param source_identifier UDID of backup data? + * @param options Additional options in a plist of type PLIST_DICT. + * + * @return MOBILEBACKUP2_E_SUCCESS if the request was successfully sent, + * or a MOBILEBACKUP2_E_* error value otherwise. + */ +LIBIMOBILEDEVICE_API mobilebackup2_error_t mobilebackup2_send_request(mobilebackup2_client_t client, const char *request, const char *target_identifier, const char *source_identifier, plist_t options); + +/** + * Sends a DLMessageStatusResponse to the device. + * + * @param client The MobileBackup client to use. + * @param status_code The status code to send. + * @param status1 A status message to send. Can be NULL if not required. + * @param status2 An additional status plist to attach to the response. + * Can be NULL if not required. + * + * @return MOBILEBACKUP2_E_SUCCESS on success, MOBILEBACKUP2_E_INVALID_ARG + * if client is invalid, or another MOBILEBACKUP2_E_* otherwise. + */ +LIBIMOBILEDEVICE_API mobilebackup2_error_t mobilebackup2_send_status_response(mobilebackup2_client_t client, int status_code, const char *status1, plist_t status2); + +#ifdef __cplusplus +} +#endif + +#endif |